22GB

Setting up the Internet

connection

Using the network feature you can connect the
TV to the Internet. The set-up procedure
differs depending on the type of network and
LAN router. Before setting up the Internet
connection, be sure to set up a LAN router.
Check your wireless LAN environment us ing
the following chart.
Wireless LAN
Wired LAN , Type 4
* Type 1 is easier to set up if your router has an
automatic setting button, e.g. Air Station One-
Touch Secure System (AOSS). Most of the latest
routers have this function. Check your router.
Type 1:Follow the configuration for “Secured
Network with Wi-Fi Protected Set-up (WPS)”.
Type 2:Follow the configuration for “Secured
Network without Wi-Fi Protected Set-up
(WPS)”.
Type 3:Follow th e configuration for
“Unsecured Network with Any Type of
Wireless LAN Router”.
Type 4:Follow the confi guration for “Wired
network set-up”.

Type 1: Secured network with

Wi-Fi Protected Set-up (WPS)

The WPS standard makes security of a wireless
home network as straightforward as pressing
the WPS button on the wireless LAN router.
Before setting up a wireless LAN, check the
location of the WPS button on the router and
verify how to use it.
For security purpose, “WPS (PIN)” provides a
PIN code for your router. PIN code is renewed
every time you select “WPS (PIN)”.
1Press HOME, then select >
“Network” > “Network Set-up”.
2Select “Wireless Set-up”.
3Select “WPS (Push Button)” for Push
Button method or “WPS (PIN)” for
PIN method.
~
Button name of the WPS may differ
depending on the router (e.g. AOSS button).
4Follow the instructions on the set-up
screen.

Type 2: Secured network

without Wi-Fi Protected Set-up

(WPS)

To set up a wireless LAN, SSID (wireless
network name) and security key (WEP or
WPA key) will be required. If you do not know
them, consult the instruction manual of your
router.
1Press HOME, then select >
“Network” > “Network Set-up”.
2Select “Wireless Set-up”.
3Select “Scan”, then select a network
from the list of scanned wireless
networks.
4Follow the instructions on the set-up
screen.
~
If you use WPS for network set-up, the security
settings of the wireless LAN router activate, and
any equipment previously connected to the
wireless LAN in a non-secure status will be
disconnected from the network.
In this case, activate the security settings of the
disconnected equipment and then reconnect. Or,
you can deactivate the security settings of the
wireless LAN router, and then connect the
equipment to a TV in a non-secure status.
Secure Wireless LAN? NO
k Type 3
YES m
Do you use a wireless LAN
router compatible with Wi-Fi
Protected Set-up (WPS)?
NO
k Type 2
YES m
Type 1*