Sony KDL-40EX725 2: Adjusting the viewing angle of the TV

9GB

Getting Started

Detaching the Table-Top Stand

from the TV

To detach the Table-Top Stand from the TV,

remove the screws fixed in step 3.

~

•Do not remove the Table-Top Stand for any

reason other than to install corresponding

accessories on the TV.

•When removing the Table-Top Stand from the

TV, lay the display face down on a stable work

surface that is larger than the TV.

•To prevent damaging the surface of the LCD

display, make sure to place a soft cloth on the

work surface.

•Be sure the TV is on the vertical position before

switching on. TV set must not powered on with

LCD panel face down to avoid uneven picture

uniformity.

2: Adjusting the viewing angle of the TV

This TV can be adjusted within the angles as

illustrated.

Angle adjustment (Swivel)

~

•When adjusting the angle, hold the stand with one

hand to avoid having the stand slip or TV tip over.

Angle adjustment (Tilt)

~

•Be careful not to pinch your fingers betw een the

TV and stand when adjusting the angle.

~

•Ensure that there are no objects in front of the TV.

•Do not expose the Presence Sensor to direct

sunlight or other strong light, as malfunction may

occur.

20°

20°

20°

20°

0° - 6°

Presence Sensor

3D Sync Transmitter

IR Sensor

Contents

Main Introduction Notes on Digital TV function Trademark information Location of the identification label Precautions Viewing the TV (Continued) LCD Screen Handling and cleaning the screen surface/cabinet of the TV set Page Page Table of Contents Getting Started Using Your BRAVIA TV Network Setup Additional Information Contents of the i-Manual Checking the accessories Inserting batteries into the remote 1 2 1: Attaching the Table-Top Stand Getting Started Detaching the Table-Top Stand from the TV To detach the Table-Top Stand from the TV, remove the screws fixed in step 3. 2: Adjusting the viewing angle of the TV This TV can be adjusted within the angles as illustrated. Angle adjustment (Swivel) Angle adjustment (Tilt) 3: Connecting an antenna (aerial)/Set Top Box/ recorder (e.g. DVD recorder) Page 6: Bundling the cables 7: Performing the initial set-up Follow the instructions on the screen. 1 outlet (mains socket). 3 2 indicator will light up in green. 1 2 1 2 1 2 Watching the TV Using Your BRAVIA TV 1 2 3 Parts and controls of the remote Selecting various functions and settings (Home Menu) 1 2 3 1, 3 Home menu map Displaying Operating Instructions (i-Manual) 1 2 Description of the i-Manual screen To use the bookmark To memorise the last displayed page Preparing a wired network Preparing a wireless LAN Network Setup Setting up the Internet connection Type 1: Secured network with Wi-Fi Protected Set-up (WPS) 1 Network > Network Set-up. 3 Button method or WPS (PIN) for PIN method. 4 1 Network > Network Set-up. 3 from the list of scanned wireless networks. 4 1 3 2 4 Type 4: Wired network set-up 1 2 3 4 Viewing the network status 1 If you cannot connect to the Internet 2 3 Adjusting the server display settings 1 2 3 1 2 Troubleshooting Additional Information Specifications (Continued) Design and specifications are subject to change without notice. Installing the Accessories (Wall-Mount Bracket) SU-WL500 Screw and Hook locations diagram/table TV installation dimensions table Unit: cm Figures in the table may differ slightly depending on the installation. 1SU-WL500 Screen centre point Safety Information Installation/Set-up Installation Transporting Ventilation Broken pieces: When not in use For children If the following problems occur... When: