1LAN Connects to an existing network using an Ethernet cable. Be sure to complete
Network Setup (page 16).
2DMex/SERVICE This USB port is only for service unless you are connecting an optional BRAVIA
Link module (DMex).
3VIDEO IN 1/
IN 1 (1080p/
This input port can be used as composite video input (VIDE O 1) or as component
video input (COMPONENT 1). For composite use, con nect the yellow jack to Y for
video and use audio (L/R) for audio signals. For component connec tion, use Y, PB,
PR for video signals and also connect the audio (L/R) for audio signals.
By default, this TV will automatically detect and switch between VIDEO 1 and
COMPONENT 1. To manually set the input type, press HOME, select Settings,
then Channels & Inputs, then select Video/Component 1 Selection.
Component video provides better picture quality than the S Video and composite
Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
Connects to the left and right audio input jacks o f your analog audio equipment. You
can use these outputs to listen to your TV’s audio through your stereo system.
6HDMI IN 1/2/3/4
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
digital audio/video interface between thi s TV and any HDMI-equipped audio/video
equipment, such as a set-top box, DVD player, and A/V receiver. HDMI supports
enhanced, or high-definition video, plus digital audio. Be sure to use only an HDMI
cable that bears the HDMI logo.
Use the HDMI IN 1 port when connecting DVI equipment with a DVI-to-HDMI
cable or adapter (not supplied). Equipment using a DVI connection also requires an
additional audio connection using an audio cable connected to AUDIO (L/R).
Connects to the optical audio input of digital audio equipment that is PCM/Dolby*
8AC IN Connects to your power source. Connect the supplied power cord to AC IN and the
nearest wall outlet.
RF input that connects to your cable or over-the-air antenna.
0USB Connects to USB equipment to access photo, music, and video files.
qa PC IN
Connects to a personal computer’s video and audio output connector. Can also be
connected to other analog RGB equipment.
For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If an adapter is used, connect the adapter to the computer before
connecting the HD15-HD15 cable.
You may need to adjust the TV settings or your PC’s resolution and timing (see
qs VIDEO IN 2
Connects to the S VIDEO output jack of video equipment. If both composite video
and S VIDEO are connected, S VIDEO signal has priority.
If you have mono equipment, connect its audio output port to the TV’s L (MONO)
audio input port.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby