Getting Started
11
Item Description
1HDMI IN 1/2/3/4
AUDIO IN
R-AUDIO-L
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
digital audio/video interface between this unit and any HDMI-equipped audio/video
equipment, such as a set-top box, DVD player, and A/V receiver. HDMI supports
enhanced, or high-definition video, plus digital audio. Be sure to use only an HDMI
cable that bears the HDMI logo.
Use the HDMI IN 1 port when connecting DVI equipment with a DVI-to-HDMI
cable or adapter (not supplied). Equipment using a DVI connection also requires an
additional audio connection using an audio cable connected to AUDIO (L/R).
2USB Connects to USB equipment to access photo, music, and video files.
3SERVICE ONLY This port is for service only.
4VIDEO 2 IN
L (MONO)-
AUDIO-R
Connects to the composite video and audio output ports on your A/V equipment.
If you have mono equipment, connect its audio output port to the media receiver’s
L (MONO) audio input port.
5AC IN Connects to your power source. Connect the supplied power cord to AC IN and the
nearest wall outlet.
6VIDEO IN 1/
COMPONENT
IN 1 (1080p/
1080i/720p/
480p/480i)/
R-AUDIO-L
This input port can be used as composite video input (VIDEO 1) or as component
video input (COMPONENT 1). For composite use, connect the yellow jack to Y for
video and use audio (L/R) for audio signals. For component connection, use Y, PB,
PR for video signals and also connect the audio (L/R) for audio signals.
By default, this unit will automatically detect and switch between VIDEO 1 and
COMPONENT 1. To manually set the input type, press HOME, select Settings,
then Channels & Inputs, then select Video/Component 1 Selection.
7AUDIO OUT
(VAR/FIX)
R-AUDIO-L
Connects to the left and right audio input jacks of your analog audio equipment. You
can use these outputs to listen to your unit’s audio through your stereo system.
8PC IN
(RGB/AUDIO)
Connects to a personal computer’s video and audio output connector. Can also be
connected to other analog RGB equipment.
For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If an adapter is used, connect the adapter to the computer before
connecting the HD15-HD15 cable.
You may need to adjust the unit settings or your PC’s resolution and timing (see
page 14).
9REMOTE This jack is for receiving the external control signal.
0CABLE/
ANTENNA
RF input that connects to your cable or over-the-air antenna.
qa COMPONENT
IN 2
Component video provides better picture quality than the composite video.
Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
qs DIGITAL AUDIO
OUT (OPTICAL)
Connects to the optical audio input of digital audio equipment that is PCM/Dolby*
Digital compatible.
qd DMex/SERVICE This USB port is only for service unless you are connecting an optional BRAVIA
Link module (DMex).
qf LAN Connects to an existing network using an Ethernet cable. Be sure to complete
Network Setup (page 21).
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.