C:\Documents and Settings\kenji\Desktop\Work\4-140-825 Caper\11(2)
EN\4140825112\4140825112_Caper EN_EN\01US05INS.fm
masterpage:Right
KDL-40Z5100/KDL-46Z5100/KDL-52Z5100
4-140-825-11(2)
Getting Started
9
Item Description
1LAN Connects to an existing network using an Ethernet cable. Be sure to complete
Network Setup (page 18).
2DMex/SERVICE This USB port is only for service unless you are connecting an optional BRAVIA
Link module (DMex).
3VIDEO IN 1/
COMPONENT
IN 1 (1080p/
1080i/720p/
480p/480i)/
L-AUDIO-R
This input port can be used as composite video input (VIDEO 1) or as component
video input (COMPONENT 1). For composite use, connect the yellow jack to Y for
video and use audio (L/R) for audio signals. For component connection, use Y, PB,
PR for video signals and also connect the audio (L/R) for audio signals.
By default, this TV will automatically detect and switch between VIDEO 1 and
COMPONENT 1. To manually set the input type, press HOME, select Settings,
then Channels & Inputs, then select Video/Component 1 Selection.
4COMPONENT
IN 2
Component video provides better picture quality than the S Video and composite
video.
Audio connection is required for the COMPONENT IN ports, connect audio (L/R).
5AUDIO OUT
(VAR/FIX)
Connects to the left and right audio input jacks of your analog audio equipment. You
can use these outputs to listen to your TV’s audio through your stereo system.
6HDMI IN 1/2/3/4
L-AUDIO-R
HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-
digital audio/video interface between this TV and any HDMI-equipped audio/video
equipment, such as a set-top box, DVD player, and A/V receiver. HDMI supports
enhanced, or high-definition video, plus digital audio. Be sure to use only an HDMI
cable that bears the HDMI logo.
Use the HDMI IN 1 port when connecting DVI equipment with a DVI-to-HDMI
cable or adapter (not supplied). Equipment using a DVI connection also requires an
additional audio connection using an audio cable connected to AUDIO (L/R).
7DIGITAL AUDIO
OUT (OPTICAL)
Connects to the optical audio input of digital audio equipment that is PCM/Dolby*
Digital compatible.
8CABLE/
ANTENNA
RF input that connects to your cable or over-the-air antenna.
9USB Connects to USB equipment to access photo, music, and video files.
0PC IN
(RGB/AUDIO)
Connects to a personal computer’s video and audio output connector. Can also be
connected to other analog RGB equipment.
For some Apple Macintosh computers, it may be necessary to use an adapter (not
supplied). If an adapter is used, connect the adapter to the computer before
connecting the HD15-HD15 cable.
You may need to adjust the TV settings or your PC’s resolution and timing (see
page 12).
qa VIDEO IN 2
S VIDEO/VIDEO
L (MONO)-
AUDIO-R
Connects to the S VIDEO output jack of video equipment. If both composite video
and S VIDEO are connected, S VIDEO signal has priority.
If you have mono equipment, connect its audio output port to the TV’s L (MONO)
audio input port.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.