Sony KE-32TS2E, KE-42TS2E manual 14

Colour	Press	/	to decrease colour intensity.
	Press	/	to increase colour intensity.

Colour cannot be adjusted for the RGB input.

Sharpness

Press

/

to soften the picture.

Press

/

to sharpen the picture.

NR (Noise

Off/Low/Mid/High

Reduction)

Select to reduce the noise level of all connected equipment. It is

most effective on the signal from the VHF/UHF jack.

You cannot adjust NR (Noise Reduction) for equipment connected to the RGB

input.

Dynamic Pict

On/Off

Select to enhance the picture contrast.

Colour Tone

Cool/Normal/Warm/User1/User2/User3

Select to give bright colours a red tint (Setting is variable from Cool

to Warm).

Select User1, User2, or User3 to customise the Colour Tone by

adjusting Red Gain, Green Gain, and Blue Gain (tint), and store

them in memory.

Name Set: Select to name your personal settings. Press

/

/

/

to select the letter, then press OK. Finally press

/

/

or

to select the word “End” on the

screen and

press OK to store.

• To correct the letter, select on the screen to go

back and press OK.

on the screen and press OK.

• For a blank, select

Colour Correct

On/Off

Select to emphasise reds and blues.

Colour Correct cannot be adjusted for the RGB input.

Gamma Correct	High/Mid/Low
	Select to adjust the balance between bright and dark areas of the
	picture.
Reset	Cancel/OK
	Select OK to reset the picture to the factory preset levels.

Each option cannot be adjusted when Mode is set to Live or Standard.

14Menu System