Sony manual

2-697-099-11(1)

KLV-23S200A

Making Audio/Video Connections

Your new TV includes various types of video inputs and analog audio jacks.

Use the outputs/inputs that are available on your components that provide the best audio/video performances:

KLV-26S200A

KLV-32S200A

KLV-40S200A

Quick Setup Guide

For further information, see the operating instruction supplied with the TV. Please retain this guide for your future reference.

Connector typeAnalog Audio

Best Audio/Video

Performance

Connector type

HDMI (High-Definition Multimedia Interface)DVI (Digital Visual Interface)

Will require an adapter to connect to this TV.

Component videoSVIDEO Composite video

Upgrade your signal to high-definition programming to view the same picture quality at home as you've seen in the store. Contact your cable or satellite provider for upgrading to high-definition TV for stunning detail and richer sound.

For Your Convenience

The connection diagrams shown below and on the reverse side are recommendations only; other possible solutions may exist. Connections that include an AV receiver can often be complex, so check your AV receiver’s instruction manual for additional details.

See the “Cables Required” chart that appears with the diagram to determine which cables you’ll need. Depending on the components you plan to connect, you may need to purchase extra cables.

Running Initial Setup

1 Press POWER to turn on the TV.	Initial Setup
		Please select your language
The Initial Setup screen appears.
		English

Español

2 Press V/v to highlight the on-screen displayFrançais language. Then press .The message “First please connect cable/antenna. Do you want to start Auto Program?” appears.

3 Press B/b to highlight “OK” then press .
	Auto Program
	Programmed Channel: 10

4 When Initial Setup is complete, the TV will

Please contact Sony directly if you have questions on the use of your television after reading your Quick Setup Guide and manual.

display the Channel Setup menu.

Now tuning

Contact Sony Customer Support at:

http://www.sony.com/tvsupport

or to speak with a support representative: Canada1-877-899-SONY (7669)

8:00 AM - 6:00 PM (Eastern)

8:00 AM - 5:00 PM (Western)

Please Do Not Return the Product to the Store

Sony Corporation © 2006 Printed in Mexico

A
				Cables Required
Use this diagram if you have;				Splitter	1
				Coaxial	3
	VCR	DVD	PC
		Player		Composite	1
				Component	1
				Audio	2
				HD15-HD15	1

If your DVD player has an HDMI jack, use that instead of the video connections shown here.

To run Auto Program again at a later time

Refer to the manual on “Initial Setup” and “Auto Program” sections.

B
								Cables Required
Use this diagram if you have;								Splitter	1
								Coaxial	4
	Cable Box		VCR	DVD	PC	AV Receiver		Composite	2
				Player				Component	1
		or
								Audio	3
Satellite Receiver
								HD15-HD15	1
								Optical Audio	1
	If your DVD player or satellite receiver has an						If you are not using a cable box or
	HDMI jack, use that instead of the video						satellite receiver, connect your cable to
	connections shown here.						the VCR’s RF IN jack.

7	6
RGB
	R	AUDIO	L
AUDIO
PC IN
VIDEO IN		HD/DVD IN
		(1080i/720p/480p/480i)
1 S VIDEO	3	4	5
		Y
		PB
VIDEO		PR	AUDIO OUT(VAR/FIX)
L		L

R

Continued,