– 18 –
KP-41S5/41S5B/41S5G/
41S5K/41S5R/41S5U
RM-862
2-10. CHASSIS BLOCK REMOVAL
1Two screws
(+ BVTP 4X16)
2Control panel assembly
3Three connectors
4Four connectors
5Screw
(+ BVTP 4X6)
6Resister (High voltage)
1Two screws
(Hexagon head)
3Set the main
bracket. 2Pull the main bracket, and
remove each connectors on main bracket.
1Six screws
(Hexagon head)
2Pull out the
chassis block.
(3) CHASSIS BLOCK REMOVAL(1) H1, H2 BOARDS AND AND RESISTOR
REMOVAL
(2) MAIN BRACKET REMOVAL
Pull out the chassis block by gripping the handles as shown
in the diagram.
At this time, pay particular attention to the components
removed in (1).
Pay particular attention to the wires of each Printed circuit
boards when puling out the main bracket.