Note:
•To view scrambled channels through the cable box, select the video input which the cable box is connected to by pressing TV/
VIDEO.
*If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow) instead of the S VIDEO cable.
**If you are connecting a monaural VCR, connect only the single audio output to the left (MONO) input on the projection TV.
Disconnect all power sources before making any connections.
Connecting a satellite receiver (SAT)
1 | Connect the cable from the satellite |
| antenna to the satellite receiver. |
2 | Attach the coaxial cable from the incoming |
(Rear of projection TV)
Cable/
AUXAntenna
TO | 2 |
CONVERTER | |
| |
IN |
|
VIDEO 1 VIDEO 3 |
|
VHF/UHF |
|
OUT |
|
Satellite antenna cable
1
cable connection or antenna to VHF/UHF |
on the projection TV. |
S VIDEO | MONITOR AUDIO |
| (VAR/FIX) |
Y | VIDEO |
SATELLITE IN
SAT
VHF/UHF
3 Using AUDIO and S VIDEO cables, |
connect AUDIO and S VIDEO OUT on the |
satellite receiver to AUDIO and S VIDEO |
IN on the projection TV |
Left, |
Note:
L | PB | L |
(MONO) |
| (MONO) |
AUDIO |
| AUDIO |
| PR | R |
| COMPONENT |
|
| S VIDEO |
|
|
| |
| ||
|
|
AUDIO R AUDIO L VIDEO S VIDEO | IN |
OUT
LINE OUT
3 
•To view input from the satellite receiver, select the video input which the satellite receiver is connected to by pressing TV/ VIDEO on the remote control.
7