Using Your New Projection TV (continued)

Using CHANNEL INDEX

You can use the CHANNEL INDEX feature to display multiple channels and select one directly.

Channels used for CHANNEL INDEX will come directly from the TV’s list of receivable channels (those set during Auto Program or through the Channel Set Up menu).

1Press .

The current channel will be reduced in size and displayed in the center of the screen in normal motion picture format. The first twelve receivable channels will appear one after another, clockwise, around the center picture. These small pictures are updated in intervals of one second. The channel number and channel caption (if set) on the second and later appearances will dim.

10

Ayellow-colored frame will appear to indicate current channel selection.

2Move the joystick in any direction to move the yellow frame to the picture that you wish to view.

3Press .

The selected picture will be enlarged for normal viewing.

To cancel CHANNEL INDEX

Press again, or select a TV channel using the 0-9 and ENTER buttons.

Tips z

To cycle through the receivable channels at a time, press CH +/–.

To freeze the center picture, press FREEZE. Press it again to resume normal center picture viewing.

Notes:

The projection TV will continually update each of the surrounding pictures while the CHANNEL INDEX screen is displayed.

Sound will only be heard from the center picture.

If one of the pictures received through CHANNEL INDEX is snowy, the entire screen may become unstable. In this case, erase the snowy channel. (see “Channel Skip/Add” on page 35)

If you leave the CHANNEL INDEX screen displayed for about 20 minutes without any additional operation, CHANNEL INDEX is canceled and the normal picture reappears.

28