32
51
Cannot receive upper channels
(UHF) when using an antenna
No color
Only snow and noise appear on
the screen
Dotted lines or stripes
TV is fixed to one channel
Double images or ghosts
Cannot operate the menu
Cannot receive any channels
when using cable TV
Cannot gain enough volume when
using a cable box
Favorite Channel does not display
your choices
Some video sources do not
appear when you press TV/VIDEO
Recording through MONITOR OUT
does not function properly when
recording in PIP mode
Cannot play shooting games
Make sure Cable is Off in the Channel Set Up menu. (see Cable on page 31)
Use Auto Program to add receivable channels that are not presently in the TVs memory. (see Auto Program on page 31)
Adjust Color in the Video menu. (see Picture Adjustment on page 26)
Black and white programs cannot be seen in color.
Perform AUTO SET UP again using the SET UP button to return to the factory preset condition. (see To perform AUTO SET UP again on page 19)
Check the Cable setting in the Channel Set Up menu. (see Cable on page 31)
Check the antenna/cable connections.
Make sure the channel is broadcasting programs.
Press ANT to change the input mode. (see ANT on page 22)
Adjust the antenna.
Keep the projection TV away from noise sources such as cars, neon signs or hair-dryers.
Use Auto Program to add receivable channels that are not presently in TVs memory. (see Auto Program on page 31)
Use a highly directional outdoor antenna or a cable (when the problem is caused by reflections from nearby mountains or tall buildings).
If the item you want to choose appears in gray, you cannot select it.
Press the projection TVs power button off and on again.
Make sure Cable is On in the Channel Set Up menu. (see Cable on page 31)
Use Auto Program to add receivable channels that are not presently in the TVs memory. (see Auto Program on page 31)
Increase the volume at the cable box. Then press TV (FUNCTION) and adjust the projection TVs volume.
Verify that Favorite Channel is set to Manual in the Channel Set Up menu. (see Setting Favorite Channel manually on page 32)
Ensure that Video Label is not set to Skip. (see Video Label on page 35)
MONITOR OUT will not record both images in PIP. Only the main picture will be recorded.
If you are recording the main picture and you switch to the sound of the sub picture using the AUDIO button, the main picture will be recorded with sound
from the other program.
Some shooting games which involve pointing a light beam at the TV screen with an electronic gun or rifle cannot be used with this projection TV. For
details, see the instruction manual supplied with the video game software.