Additional Information
Troubleshooting
If you have any problem while viewing your projection TV, please check the following troubleshooting guide. If the problem persists, contact your Sony dealer.
Symptom | Possible cause | Solutions | Page |
Snowy picture | • The connection is | • Check the antenna cable and | 6 |
| loose or the cable is | connection on the projection TV, VCR |
|
| damaged. | and on the wall. |
|
| • Channel presetting | • Display the “CH PRESET” menu | 45 |
| is inappropriate or | under the “SETUP” menu and select |
|
Noisy sound | incomplete. | “MANUAL PROGRAM” to preset |
|
| the channel again. |
| |
| • The antenna type is | • Check the antenna type (VHF/UHF). | – |
| inappropriate. | Contact a Sony dealer for advice. | |
|
| ||
| • The antenna | • Adjust the antenna direction. Contact | – |
| direction needs | a Sony dealer for advice. | |
|
| ||
| adjustment. |
|
|
| • Signal transmission | • Try using a booster. | – |
| is low. |
|
|
Distorted picture | • Broadcast signals | • Display the “CH PRESET” menu | 46 |
| are too strong. | under the “SETUP” menu and select | |
|
| ||
|
| “MANUAL PROGRAM”. |
|
|
| Then, select “ SENS: LOW”. |
|
|
| • Turn off or disconnect the booster if it | – |
Noisy sound |
| is in use. |
|
|
|
| |
Good picture | • The TV system | • If the sound of all the channels are noisy, | 43 |
| setting is | display the “CH PRESET” menu under |
|
| inappropriate. | the “SETUP”menu and select “AUTO |
|
|
| PROGRAM” to preset the channels again. |
|
|
| • If the sound of some channels is noisy, | 45 |
Noisy sound |
| select the channel, then display the |
|
| “CH PRESET” menu under the |
| |
|
|
| |
|
| “SETUP”menu and select the appropriate |
|
|
| TV system (“TV SYS”). |
|
| • The sound of the right | • Press or . | 21 |
| picture is selected |
|
|
| when TWIN pictures |
|
|
| are displayed. |
|
|
Information Additional
continued
Additional Information 49