Operating Instructions
Connecting Additional Equipment
Connecting a TV and VCR
| Rear of TV | |||
|
|
|
| AUDIO OUT |
| 1 | 3 | 4 | (VAR/FIX) |
2 |
|
| Y |
|
S VIDEO | PB |
| ||
|
|
| PR |
|
VCR |
| VIDEO |
|
|
1 |
| L |
| L |
| (MONO) |
| (MONO) | |
|
| R | R | R |
From |
|
|
|
|
cable/antenna |
|
|
| Video (yellow) |
|
|
|
| Audio L (white) |
|
|
|
| Audio R (red) |
Optional connection
1 Connect the coaxial cable from your TV antenna or cable service to the IN jack on your VCR.
2 Connect a coaxial cable (not supplied) from the OUT jack on your VCR to the VHF/UHF jack on the TV.
Using your TV with this connection
This connection allows you to do the following:
❏Program your Sony remote control to operate your VCR (see page 5).
❏To activate your remote, press to operate your VCR. To do this, first program your remote control, then use the Channel Fix feature to set your TV to channel 3 or 4 (see page 27).
❏Press repeatedly to switch between VCR input (VIDEO input) and VHF/UHF (local channels).
Optional connection
❏If your VCR is equipped with video outputs, you can get better picture quality by connecting audio/video cables (not supplied) from AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
❏For better picture quality, use S VIDEO instead of the yellow video cable. S VIDEO does not provide sound, so you still must connect the audio cables.
12