Connecting Your TV
Connecting a TV, VCR, and Satellite Receiver
4 | From | Rear of TV | |||
1 | cable/ |
|
| Y | AUDIO OUT |
antenna |
| 3 | (VAR/FIX) | ||
|
| 1 | 4 |
| |
| 2 | S VIDEO |
|
| |
|
|
| PB |
| |
| VCR |
|
| PR |
|
|
|
| VIDEO |
|
|
|
|
| L |
| L |
|
|
| (MONO) |
| (MONO) |
|
|
|
|
| |
|
|
| R |
| R R |
Satellite receiver |
|
|
|
| Video (yellow) |
|
| 3 |
|
| |
|
|
|
| Audio L (white) | |
|
|
|
|
| Audio R (red) |
5
1Connect the coaxial cable from your satellite antenna to SATELLITE IN on the satellite receiver.
2Connect the coaxial cable from your cable service or antenna to the IN jack on your VCR.
3Using a coaxial cable (not supplied), connect the OUT jack on your VCR to the VHF/UHF jack on your TV.
4Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your satellite receiver to AUDIO/VIDEO IN on your VCR.
5Using audio/video cables (not supplied), connect AUDIO/VIDEO OUT on your VCR to AUDIO/VIDEO IN on your TV.
✍To view from the satellite receiver or VCR, select the video input to which your satellite receiver or
VCR is connected by pressing 
on the remote control.
Using your TV with this connection
This connection allows you to do the following:
❏Program your Sony remote control to operate your VCR or satellite receiver (see page 5).
❏Turn on your VCR to enable your satellite receiver to work with this connection.
❏To activate your remote, press 
to operate your VCR or 
to operate your satellite receiver.
❏Press 
repeatedly to switch between VCR input (VIDEO input), VHF/UHF
(local channels or unscrambled), or your cable box (cable system or scrambled channels).
15