KV-36FS76U
1 Connecting an aerial and VCR to the TV
Quick Start Guide
Thank you for choosing this
Sony Trinitron Television.
This step by step guide will help you to:
Connect an aerial to the TV,
Connect a video cassette recorder (VCR) to the TV, Insert batteries into the remote control,
Switch on the TV,
Tune the TV,
Watch TV programmes,
Watch video tapes.
|
| RF lead |
Scart lead |
| (not supplied) |
(not supplied) | VCR | OUT |
| IN | |
|
|
1. Connect your aerial lead to the IN* socket on your VCR.
2. Connect an RF lead from the OUT* socket on your VCR to the aerial socket labelled 8 on the rear of the TV.
3. Connect a fully wired
Notes: *Socket names may vary depending on make and model of VCR. Refer to your VCR instruction manual for details.
**If your VCR does not have a scart socket follow the connecting instructions above ignoring the scart lead connection.
You will also need to manually tune the VCR to a spare TV channel (ideally channel 0, refer to the ‘Manual Programme Preset menu’ section of the main instruction manual).
Connecting an aerial only
1. Connect your aerial lead to the aerial socket labelled 8 on the rear of the TV.
2 | Inserting batteries | into | 3 | Switching on the TV |
the remote control |
|
© 2002 Sony Corporation |
12
3
Always remember to:
•observe the correct polarity when inserting batteries,
•dispose of batteries in an environmentally friendly way.
On/Off button
1. Connect the TV plug to your mains socket and switch on.
2. The TV is usually switched on. If not, push in the On/Off button ! on the front of the TV.
If the red standby mode indicator on the front of the TV is lit, press the TV I/1 button on the remote control to switch on the TV set. Please be patient as the picture may take a few moments to appear on the TV screen.