– 22 –
KV-ES29M90
RM-916
31
Adjusting Your Setup (MENU)
For
“PICTURE”
“COLOR”
“BRIGHT”
“HUE”*
“SHARP”
COLOR 08
BALANCE 00
bb
bb
Adjusting the “ADJUST” options under “PICTURE MODE”
1
Move up or down to
select the desired item
(e.g., “COLOR”), then
press .
2
Adjust the value according to the following table, then press .
* You can adjust “HUE” for the NTSC color system only.
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “PERSONAL”.
Adjusting the “ADJUST” options under “SOUND MODE”
1
Move up or down to
select the desired item
(e.g., “BALANCE”), then
press .
2
Adjust the value according to the following table, then press .
3
Repeat the above steps to adjust other items.
The adjusted settings will be received when you select “PERSONAL”.
For
“BASS”
“TREBLE”
“BALANCE”
“BBE”
Move
down or left to decrease the bass, up or right to increase the bass.
down or left to decrease the treble, up or right to increase the treble.
down or left to increase the left speaker’s volume, up or right to increase
the right speaker’s volume.
up or down to select “HIGH”, “LOW”, or “OFF”.
“BBE” can produce clear sound.
continued
Move down or left to
decrease picture contrast
decrease color intensity
darken the picture
increase red picture tones
soften the picture
Move up or right to
increase picture contrast
increase color intensity
brighten the picture
increase green picture tones
sharpen the picture
32
Adjusting Your Setup (MENU)
To
receive digital audio signal through DIGITAL IN (component
video input) jack.
receive analog audio signal through L and R (component
video input) jack.
b
A/ V CONT ROL
ON
PICTURE MODE
DRC-MF : DRC OFF
SOUND MODE
SURROUND : O
DIGITAL IN
Changing the “A/V CONTROL” setting (continued)
Setting the “DIGITAL IN” options
1
In the “DIGITAL IN”
menu, move up or
down to select the
desired option (see table
below).
2
Press to confirm the
selected option.
Note
•Your TV can only receive Dolby Digital or Linear PCM format digital
signals through the DIGITAL IN (component video input) jack
(see page 7). Receiving any other format digital signal may cause
unwanted noise or no sound from the speakers.
Tip
•For details on the menu system and how to use the menu, refer to
“Introducing the menu system” on page 27.
Select
“ON“
“OFF”