Sony KV-J14P2S, KV-J51PF2S

– 11 –

KV-J14P2S/J51PF2S

RM-869

Anode button

2-7. PICTURE TUBE REMOVAL

2Using a thumb press down, then pull up the rubber cap firmly in the direction

indicated by the arrow b.

3When one side of the rubber cap is separated from the anode button, the

anode-cap can be removed by turning up the rubber cap and pulling it up in the

direction of the arrow c.

•HOW TO HANDLE AN ANODE-CAP

1Do not damage the surface of anode-cap with sharp shaped objects.

2Do not press the rubber too hard so as not to damage the inside of anode-cap.

A metal fitting called the shatter-hook terminal is built into the rubber.

3Do not turn the foot of rubber over too hard.

The shatter-hook terminal will stick out or damage the rubber.

•REMOVAL OF ANODE-CAP

NOTE : After removing the anode, short circuit the anode of the picture tube and the anode

cap to the metal chassis, CRT shield or carbon paint on the CRT.

•REMOVING PROCEDURES

1Turn up one side of the rubber cap in the direction indicated by the arrow a.

Cushion

4 A board

6 C board

7 Deflection yoke

8 Four screws

(Tapping screws)

3 Anode cap

2 Speaker

block assy

1 Two screws

(+BVTP 4×16)

1 Two screws

(+BVTP 4×16)

2 Speaker

block assy