Installing and Connecting the Projection TV (continued)
Mounting the Supplied Rear Speakers
For enhanced surround effect, connect the supplied rear speakers to your projection TV.
Connecting the rear speakers
Using the supplied speaker cords, connect REAR SPEAKER OUT L on your projection TV to the speaker terminal on one rear speaker, and connect REAR SPEAKER OUT R to the terminal on the other one.
(Rear of projection TV)
REAR SPEAKER OUT(MIN 16
)
L
Speaker cord (supplied)
Speaker (supplied) | Speaker (supplied) |
6
Installation
For optimum surround effect, mount the rear speakers in the following places (as shown in the illustration):
•on a wall, a little higher or lower than the listener’s ears.
•on a table, a little lower than the listener’s ears.
•at the corner where the wall and ceiling meet.
Rear speaker
Projection TV
(Rear of projection TV)
Left rear | Right rear |
speaker | speaker |
Note:
•Match the colors of the speaker cords and the terminals. If the colors are reversed, sound will be distorted.
Connector Types
You may find it necessary to use some of the following connector types during set up.
Coaxial cable
Standard TV cable and antenna cable
Plug Type
Push into connection.
Screw into connection.
S Video cable
High quality video cable for enhanced picture quality
Align guides and push into connection.
Audio/Video cable
Push into connection. Video - Yellow
Audio (Left) - White
Audio (Right) - Red
Some DVD Players are equipped with the following three video connectors.
Y - Green
PB (CB, Cb or