Using Conventional TV Features
Watching Conventional TV
Many Conventional TV features can be accessed directly through the remote control. The following chart will explain the function of some buttons found on your remote control.
REFER TO THE ILLUSTRATION OF THE REMOTE CONTROL ON THE INSIDE FRONT COVER OF THIS MANUAL AS YOU REVIEW THIS CHART
To use the remote control for conventional TV programs (VHF/ UHF and AUX inputs)
First, press TV ANT on the remote control so that the TV FUNCTION indicator on the remote control lights up in red momentarily.
The remote control functions for conventional TV programs.
TV ANT | Lights up |
FUNCTION | TV in red. |
Make sure that the TV FUNCTION indicator lights up in red each time you press the buttons listed in the tables.
Using the White Labeled Buttons for Projection TV Operations
TV (FUNCTION) | Activates the remote control for use with the projection TV. | ||
|
|
| |
p TV ANT | Press once to activate the remote control for use with conventional TV | ||
(AUX input) | programs. Next, each further press changes operation between the VHF/ | ||
| UHF input and the AUX input. (for detailed connection information, see | ||
| “Cable and antenna” on page 7 or “Cable box and cable” on page 8) | ||
|
|
| |
TV POWER | Turns the projection TV on and off. If a video input indication (e.g., VIDEO 1, | ||
| VIDEO 2) appears on the screen, press TV/VIDEO until a channel number | ||
| appears. | ||
|
|
| |
0 - 9 | Use for direct conventional TV channel selection. Press | ||
and ENTER | channel (for example, to select channel 10, press 1 and 0). The channel will | ||
change after 2 seconds, or you can press ENTER for immediate selection. | |||
| |||
|
|
| |
CH +/– | Press to scan through the channels (+ up or – down). | ||
|
|
| |
VOL +/– | Press to adjust the volume (+ up or – down). | ||
|
| ||
| (continued) | ||
36