Using the Yellow Labeled Buttons for P&P Operations

CH

 

Press to select the TV channel on which the symbol “b” (or “B”) is

 

 

 

 

 

 

or 0 -

9 or JUMP

displayed. (for details, see “Watching Conventional TV” on page

 

 

36)

 

 

and ENTER

 

(white labeled button)

 

 

 

 

 

 

 

TV ANT

Press to change between the VHF/UHF input and the AUX input for the picture on

 

 

 

which the symbol “b” (or “B”) is displayed.

(white labeled

 

 

button)

 

 

 

 

 

 

 

 

AUDIO

Press to alternate sound between the right and left pictures. The symbol " " will

 

 

 

 

 

 

appear for a few seconds to indicate which picture’s sound is being received.

 

 

 

 

 

 

FREEZE

This is useful when you need to copy down information that appears on the TV’s

 

screen.

 

 

 

 

 

 

 

 

Press to freeze both the right and left pictures.

 

 

 

Press again to resume P&P viewing or press (OFF) to cancel and resume normal

 

 

 

TV viewing.

 

 

 

 

 

 

 

SWAP

Press to switch the audio and video of the right and left pictures.

 

 

 

 

 

 

Each time you press SWAP, the picture and sound of the two will be exchanged.

 

 

 

 

 

 

 

OFF

Press to cancel the P&P function and return to normal viewing.

 

 

 

 

 

REFER TO THE

ILLUSTRATION OF THE

REMOTE CONTROL ON THE

INSIDE FRONT COVER OF

THIS MANUAL AS YOU

REVIEW THIS CHART

Notes:

If one of the pictures received through P&P is snowy, the entire screen may become unstable. In this case, erase the snowy channel. (see “CHANNEL SKIP” on page 54)

The right and left pictures (except for the 16:9 aspect ratio signals with ID-1 or S1) are always displayed in an aspect ratio of 4:3. The WIDE MODE button on the remote control does not function with the P&P mode.

HD programs are always displayed in an aspect ratio of 16:9.

43