Adjusting the Speaker Volume for Customized Surround Mode

After you set SURROUND to one of the modes, adjust the volume of the front, center and rear speakers to the same level so that the projection TV’s sound will be even and natural. For aPRO LOGIC and a3 STEREO, adjust the speaker volume using the test tone feature.

Adjusting the speaker volume

1Select SURROUND LEVEL from the AUDIO menu. (see pages 49 and 50)

aPRO-LOGIC

 

CENTER

 

REAR

 

BALANCE

 

TEST TONE :

OFF

Move Select Exit MENU

2Move the joystick up or down to select the speaker for volume adjustment and press .

aPRO-LOGIC

CENTER

REAR

BALANCE

 

TEST TONE :

OFF

Move Select Exit MENU

CENTER: Select to adjust the level of the center speaker. (not available for

SIMULATED)

REAR: Select to adjust the level of the rear speakers. (not available for

a3 STEREO)

BALANCE: Select to adjust the balance between the right and left speakers.

3Move the joystick up, down, left or right to adjust the volume level and press .

4Use the joystick to select other speakers and to adjust the volume levels.

Adjusting the speaker volume using the test tone

The TEST TONE feature makes it easier to adjust the volume level. You can use this feature for aPRO LOGIC and a3 STEREO modes only.

1With the SURROUND LEVEL window open, move the joystick up or down to select TEST TONE and press .

aPRO-LOGIC CENTER REAR BALANCE

TEST TONE :

ON

 

 

OFF

Move

Select

Exit MENU

2Move the joystick up or down to select ON.

A test tone will be output from each speaker in sequence:

Front left nCenter nFront right nRear n

To turn off the test tone, select OFF.

3Follow steps 2 through 4 in “Adjusting the speaker volume.”

51