Programming CD tracks (continued)

7 Repeat steps 4 through 6 to program additional tracks.

Skip step 4 to select tracks from the same disc.

8 Press ·.

All the tracks play in the order you selected.

To cancel Program Play

Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display.

To

Press

Check the program

CHECK on the remote

 

repeatedly. After the

 

last track, “CHECK

 

END” appears.

Clear the last selected

CLEAR on the remote

track

in stop mode.

Clear a specific track

CHECK on the remote

 

repeatedly until the

 

number of the track to

 

be cleared lights up,

 

then press CLEAR.

Add a track to the

1 Press DISC SKIP to

program

select a CD.

 

2 Turn the jog dial to

 

select a track.

 

3 Press PLAY MODE.

Clear the entire

ponce in stop mode or

program

twice while playing.

Tips

•The program you created remains in the CD

player's memory even after it has been played. Press · to play the same program again.

•If “--.--” appears instead of the total playing time while programming, this means:

–you have programmed a track numbered over 20, or

–the total playing time has exceeded 100 minutes.

Playing CDs without interruption

–– Non-Stop Play

You can play CDs without pausing between tracks.

1

23

1 Press FUNCTION repeatedly until “CD” appears in the display.

2 Press NON-STOP so the indicator on this button lights up.

3 Press ·.

To cancel Non-Stop Play

Press NON-STOP so the indicator on this button goes off.

22