Step 3: Presetting radio stations (continued)
To tune in a station with a weak signal
Press TUNING MODE repeatedly until “MANUAL” appears in step 2, then press TUNING +/– to tune in the station.
To change the preset number
Start over from step 1.
Note
The preset stations are canceled when you disconnect the power cord or if a power failure occurs for half a day.
8
Connecting optional AV components
To enhance your system, you can connect optional components. Refer to the instructions included with each component for details.
Connecting audio components
Connecting a turntable
Be sure to match the color of the plugs and the connectors. To listen to the sound from the connected turntable, press FUNCTION repeatedly until “PHONO” appears.
To the audio output of the turntable
Note
Using the turntable at high volume may cause distortion or howling. This is often caused by the bass sound from the speakers. The bass sound may be picked up by the needle of the turntable, and produce the distortion or howling. To avoid this, do the following:
1 Keep some distance between the speakers and the turntable.
2 Stop using the surround effect.
3 Install the speakers or the turntable on a firm and
stable surface. |
|
4 Press DBFB repeatedly until “DBFB | ” |
disappears from the display
Press SUPER WOOFER repeatedly until the indicator on this button goes off (except for LBT- D390/G5500/XB33/XB33K/XB50).