NAdditional information

Precautions

When the transmitter is not to be used for a long period of time, disconnect the AC power adaptor from the AC outlet holding the plug and remove the batteries to avoid damage caused by battery leakage and subsequent corrosion.

Do not leave the wireless stereo headphones system in a location subject to direct sunlight, heat or moisture (It is recommended to use the headphones at a temperature of between 5˚C and 35˚C (between 41˚F and 95˚F).)

Do not drop, hit or otherwise subject the transmitter or headphones to strong shocks of any kind. This could damage the product.

Notes on headphonesPreventing hearing damage

Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.

Caring for others

Keep the volume at a moderate level. This will allow you to hear outside sounds and to be considerate to the people around you.

If you have any questions or problems concerning the system that are not covered in this manual, please consult the nearest Sony dealer.

Be sure to bring the headphones and the transmitter to the Sony dealer when requiring repair work.

Troubleshooting

ProblemSolution

 

 

No sound/

Turn on the transmitter first, and then

Muffled

put on the headphones.

sound

 

Check the connection of the audio/

 

 

video equipment or the AC power

 

adaptor.

 

 

 

Check that the audio/video

 

equipment connected to the

 

transmitter is turned on.

 

 

 

If the transmitter is connected to the

 

headphones jack, raise the volume of

 

the audio/video equipment

 

connected to the transmitter.

 

 

 

Change the radio frequency with the

 

CHANNEL selector on the

 

transmitter, then press the TUNE

 

button again.

 

 

 

The mute function is activated.

 

Use the headphones near the

 

transmitter.

 

 

 

The headphones’ power indicator

 

light dims, flashes or goes off.

 

• Charge the rechargeable batteries if

 

the headphones’ batteries are weak,

 

or replace dry batteries with new

 

ones. If the power indicator is still

 

off after charging the batteries, take

 

the headphones to a Sony dealer.

 

 

 

If you connect the transmitter to the

 

LINE OUT or REC OUT jacks of an

 

audio reproducer, make sure that the

 

NOISE FILTER switch is set to OFF.

 

 

 

Make sure that the NOISE FILTER

 

switch is set to either ON or OFF (If

 

the switch gets stuck between ON and

 

OFF, the sound will be cut off).

 

 

12