Playing MDs

 

Editing Recorded MDs

 

 

 

 

 

 

 

 

 

 

 

 

Useful Tips When Recording From MDs to Tape

The Auto Space and Auto Pause Functions described in this section make recording from MDs to tape more easy.

6

A.SPACE/PAUSE

A.SPACE

á P p

Inserting blank spaces while recording to tape (Auto Space)

The Auto Space Function inserts a 3-second blank space between each track while recording from MDs to tapes, allowing you to use the AMS function during playback later.

Press A.SPACE/PAUSE (or A.SPACE) repeatedly until “A.SPACE” appears in the display.

To cancel Auto Space

Press A.SPACE/PAUSE (or A.SPACE) repeatedly until “A.SPACE” disappears.

Notes on Editing

You can edit the recorded tracks after recording, using the following functions:

•Erase Function allows you to erase recorded tracks simply by specifying the corresponding track number.

•Divide Function allows you to divide tracks at specified points so that you can quickly locate those points afterwards, using the AMS function.

•Combine Function allows you to combine two consecutive tracks into one.

•Move Function allows you to change the order of tracks by moving a specific track to a desired track position.

•Title Function allows you to create titles for your recorded MDs and tracks.

If “Protected” appears in the display

The recorder could not edit because the record-protect slot on the MD is open. Edit after closing the slot (see page 7.)

When “TOC” flashes in the display

Do not move the recorder or pull out the AC power cord. After editing, “TOC” lights continuously until you eject the MD. “TOC” flashes while the recorder is updating the TOC. When the recorder finishes updating the TOC, “TOC”goes off.

Note

If the Auto Space Function is on while recording a selection containing multiple track numbers, (for example, a medley or symphony), blank spaces will be inserted within the selection whenever the track number changes.

Pausing after each track (Auto Pause)

When the Auto Pause Function is on, the recorder pauses after playing each track. Auto Pause is convenient when recording single tracks or multiple, non-consecutive tracks.

Press A.SPACE/PAUSE (or A.SPACE) repeatedly until “A.PAUSE” appears in the display.

To restart playback

Press áor P.

To cancel Auto Pause

Press A.SPACE/PAUSE (or A. SPACE) repeatedly until “A.PAUSE” disappears.

Note

If you turn off the recorder or disconnect the AC power cord, the recorder will recall the last setting of the Auto Space and Auto Pause Functions the next time you turn on the

20 recorder.

Erasing Recordings

(Erase Function)

Follow the procedures below to erase:

•A single track

•All tracks

•Part of a track

Note, however, that once erased, MD data cannot be recovered.

-AMS±EDIT/NO YES