16
To stop recording
Press s on the MD deck.
If the MD becomes full during
recording
The MD deck and the CD player automatically
stop.
Note
If the MD is record protected, “C11” and “Protected”
appear alternately and the MD cannot be recorded.
Remove the MD, then slide the record protection tab
to the closed position (see page 11).
Labelling titles during recording
If “CD-TEXT” lights up or flashes during
recording, you can record the CD TEXT
information onto the MD as follows:
• Automatically during recording
If you record on an unrecorded or completely
erased (see page 32) MD when “CD-TEXT” is
lit, the CD TEXT information is automatically
recorded.
• Manually during recording
When “CD-TEXT” flashes, press NAME EDIT
on the remote, and then press ENTER/YES to
record the title of the current track.
Note
Depending on the disc, the CD TEXT information
may not be recorded automatically.
Recording your favouriteportions on an MD— Manual Recording
With manual recording, you can record just the
portions you like from a CD, or start recording
from the middle of the tape. If you use a partially
recorded MD, recording starts after the recorded
tracks.
4
3
1Insert a recordable MD.
2Turn FUNCTION on the amplifier until
“CD” or “TAPE” appear.
• CD: Recording from the CD
• TAPE: Recording from the tape
3Press z REC on the MD deck.
The MD deck stands by for recording.
4Press H on the MD deck.
Recording starts.
5Press H on the CD player or H or
h on the tape deck.
To stop recording
Press s on the MD deck.