During playback or reception, demonstration mode starts.
If no operation is performed for 5 minutes with
– Set
The display disappears from/does not appear in the display window.
The dimmer is set to
The display disappears if you press and hold
.
–Press on the unit until the display appears.
The connectors are dirty (page 42).
The Auto Off function does not operate.
The unit is turned on. The Auto Off function activates after turning off the unit.
– Turn off the unit.
The operation buttons do not function. The disc will not eject.
Press and 
(BACK)/ for more than 2 seconds.
The contents stored in memory are erased. For your safety, do not perform the reset operation while you are driving.
Radio reception
The stations cannot be received. The sound is hampered by noises.
The connection is not correct.
–Connect an REM OUT lead (blue/white striped) or accessory power supply lead (red) to the power supply lead of a car’s antenna (aerial) booster (only when your car has
–Check the connection of the car antenna (aerial).
–If the auto antenna (aerial) will not go up, check the connection of the power antenna (aerial) control lead.
Preset tuning is not possible.
Store the correct frequency in the memory.
The broadcast signal is too weak.
Automatic tuning is not possible.
The broadcast signal is too weak.
– Perform manual tuning.
RDS
PTY displays “- - - - - - - -.”
The current station is not an RDS station.
RDS data has not been received.
The station does not specify the program type.
CD playback
The disc cannot be loaded.
Another disc is already loaded.
The disc has been forcibly inserted upside down or in the wrong way.
The disc does not play back.
Defective or dirty disc.
The
MP3/WMA/AAC files cannot be played back.
The disc is incompatible with the MP3/WMA/ AAC format and version. For details on playable discs and formats, visit the support site.
MP3/WMA/AAC files take longer to play back than others.
The following discs take a longer time to start playback.
–A disc recorded with a complicated tree structure.
–A disc recorded in Multi Session.
–A disc to which data can be added.
The display items do not scroll.
For discs with very many characters, those may not scroll.
“AUTO SCR” is set to “OFF.”
–Set
–Press and hold (SCRL).
The sound skips.
Installation is not correct.
–Install the unit at an angle of less than 45° in a sturdy part of the car.
Defective or dirty disc.
45
