MHC-EC609iP.GB.4-409-772-12(1)

WARNING

To reduce the risk of re or electric shock,
do not expose this apparatus to rain or
moisture.
To reduce the risk of re, do not cover the ventilation
opening of the apparatus with newspapers, tablecloths,
curtains, etc. Do not place the naked ame sources such
as lighted candles on the apparatus.
To reduce the risk of re or electric shock, do not expose
this apparatus to dripping or splashing, and do not place
objects lled with liquids, such as vases, on the apparatus.
Do not install the appliance in a conned space, such as a
bookcase or built-in cabinet.
As the main plug is used to disconnect the unit from the
mains, connect the unit to an easily accessible AC outlet.
Should you notice an abnormality in the unit, disconnect
the main plug from the AC outlet immediately.
Do not expose batteries or apparatus with battery-
installed to excessive heat such as sunshine, re or the
like.
e unit is not disconnected from the mains as long as it
is connected to the AC outlet, even if the unit itself has
been turned o.
Indoor use only.
CAUTION
e use of optical instruments with this product will
increase eye hazard.
Notice for the customers in Europe
is appliance is classied
as a CLASS 1 LASER
product. is marking
is located on the rear
exterior.
Notice for the customers in the
U.S.A.
Owners Record
e model and serial numbers are located on the rear of
the unit. Record these numbers in the space provided
below. Refer to them whenever you call upon your Sony
dealer regarding this product.
Model No. MHC-EC609iP
Serial No.
Important Safety Instructions
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
ampliers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades
with one wider than the other. A grounding type
plug has two blades and a third grounding prong.
e wide blade or the third prong are provided for
your safety. If the provided plug does not t into your
outlet, consult an electrician for replacement of the
obsolete outlet.
10) Protect the power cord from being walked on
or pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11) Only use attachments/accessories specied by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specied by the
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination to
avoid injury from tip-over.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualied service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has
been exposed to rain or moisture, does not operate
normally, or has been dropped.
The following FCC statement
applies only to the version of this
model manufactured for sale in
the U.S.A. Other versions may
not comply with FCC technical
regulations.
NOTE:
is equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. ese limits are designed
to provide reasonable protection against harmful
interference in a residential installation. is equipment
generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and
receiver.
Connect the equipment into an outlet on a circuit
dierent from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV
technician for help.
CAUTION
You are cautioned that any changes or modications
not expressly approved in this manual could void your
authority to operate this equipment.
Notice for the customers in North
America
is symbol is intended to alert the
user to the presence of uninsulated
dangerous voltage” within the
products enclosure that may be of
sucient magnitude to constitute a risk
of electric shock to persons.
is symbol is intended to alert the
user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
Notice for customers: the following
information is only applicable
to equipment sold in countries
applying EU directives.
e manufacturer of this product is Sony Corporation,
1-7-1 Konan Minato-ku Tokyo, 108-0075 Japan. e
Authorized Representative for EMC and product safety is
Sony Deutschland GmbH, Hedelnger Strasse 61, 70327
Stuttgart, Germany. For any service or guarantee matters
please refer to the addresses given in separate service or
guarantee documents.
For customers in Europe and
Australia
Disposal of Old Electrical &
Electronic Equipment
(Applicable in the European
Union and other European
countries with separate
collection systems)
is symbol on the product or on its packaging indicates
that this product shall not be treated as household
waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and
electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. e recycling of materials
will help to conserve natural resources. For more detailed
information about recycling of this product, please
contact your local Civic Oce, your household waste
disposal service or the shop where you purchased the
product.
Applicable accessories: Remote commander
Europe only
Disposal of waste batteries
(applicable in the European
Union and other European
countries with separate
collection systems)
is symbol on the battery or on the packaging indicates
that the battery provided with this product shall not be
treated as household waste. On certain batteries this
symbol might be used in combination with a chemical
symbol. e chemical symbols for mercury (Hg) or lead
(Pb) are added if the battery contains more than 0.0005%
mercury or 0.004% lead. By ensuring these batteries are
disposed of correctly, you will help prevent potentially
negative consequences for the environment and human
health which could otherwise be caused by inappropriate
waste handling of the battery. e recycling of the
materials will help to conserve natural resources.
In case of products that for safety, performance or data
integrity reasons require a permanent connection with an
incorporated battery, this battery should be replaced by
qualied service sta only. To ensure that the battery will
be treated properly, hand over the product at end-of-life
to the applicable collection point for the recycling of
electrical and electronic equipment.
For all other batteries, please view the section on how
to remove the battery from the product safely. Hand the
battery over to the applicable collection point for the
recycling of waste batteries.
For more detailed information about recycling of this
product or battery, please contact your local Civic Oce,
your household waste disposal service or the shop where
you purchased the product.
Notes on discs
is product is designed to playback discs that conform
to the Compact Disc (CD) standard. DualDiscs and
some music discs encoded with copyright protection
technologies do not conform to the Compact Disc (CD)
standard. erefore, these discs may not be compatible
with this product.
License and Trademark Notice
iPhone, iPod, iPod classic, iPod nano, and iPod touch
are trademarks of Apple Inc., registered in the U.S. and
other countries.
“Made for iPod,” and “Made for iPhone” mean that
an electronic accessory has been designed to connect
specifically to iPod or iPhone, respectively, and
has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the
operation of this device or its compliance with safety
and regulatory standards. Please note that the use of
this accessory with iPod or iPhone may affect wireless
performance.
MPEG Layer-3 audio coding technology and patents
licensed from Fraunhofer IIS and omson.
All other trademarks and registered trademarks are of
their respective holders. In this manual, TM and ® marks
are not specied.

Operations

Note on the CD compartment
Do not open the CD compartment when “READING” appears or
during playback, as this may cause a malfunction.
Note on Repeat Play
“REP1” indicates that a single track or le is repeated until you stop it.
Note on shue play mode
When you turn o the system, the selected shue play mode (“SHUF”
or “ SHUF”) is cleared and the play mode returns to normal play
mode (“ ”).
Notes on playing MP3 discs
Do not save other types of tracks or les or unnecessary folders on a
disc that has MP3 les.
Folders that have no MP3 les are skipped.
MP3 les are played back in the order that they are recorded onto
the disc.
e system can only play MP3 les that have a le extension of
.mp3”.
Even when le name has the “.mp3” le extension, if the actual
le diers, playing this le may generate a loud noise which could
damage the speaker system and the system may malfunction.
e maximum number of:
folders is 255 (including the root folder).
MP3 les is 512.
folder levels (the tree structure of les) is 8.
Compatibility with all MP3 encoding/writing soware, recording
device, and recording media cannot be guaranteed. Incompatible
MP3 discs may produce noise or interrupted audio or may not play
at all.
Notes on playing multisession discs
If the disc begins with a CD-DA (or MP3) session, it is recognized
as a CD-DA (or MP3) disc, and playback continues until another
session is encountered.
A disc with a mixed CD format is recognized as a CD-DA disc.

Listening to the radio

1 Select the tuner function (FM/AM).
Press FUNCTION +/ (or TUNER/BAND on
the unit) repeatedly.
2 Perform tuning.
For automatic scanning
Press TUNING MODE repeatedly until “AUTO
appears, and then press + / (or TUNING +
/ on the unit). Scanning stops automatically
and “TUNED” and “ST” (for stereo programs only)
light up on the display when a station is found.
If “TUNED” does not light up and the scanning does
not stop, press to stop scanning, then perform
manual tuning (below).
For manual tuning
Press TUNING MODE repeatedly until
“MANUAL” appears, and then press + / (or
TUNING + / on the unit) repeatedly to tune
to the desired station.
Tip
To reduce static noise on a weak FM stereo station, press FM MODE
repeatedly until “MONO” appears to turn o stereo reception. You
will loose stereo eect, but reception will improve.
Presetting radio stations
Use buttons on the remote to preset stations.
1 Tune to the desired station.
2 Press TUNER MEMORY to select the tuner
memory mode.
Preset number
3 Press + / repeatedly to select the desired
preset number.
If another station is already assigned to the selected
preset number, the station is replaced by the new
station.
4 Press to store the station.

Playing a CD/MP3 disc

1 Select the CD function.
Press FUNCTION +/ repeatedly (or CD on
the unit).
2 Place a disc.
Press PUSH OPEN/CLOSE on the unit,
and place a disc with the label side up on the CD
compartment.
To close the CD compartment, press PUSH OPEN/
CLOSE on the unit.
PUSH OPEN/CLOSE
3 Start playback.
Press (play) (or  (play/pause) on the unit)
.
To Press
Pause playback (pause) (or  (play/pause)
on the unit) . To resume play,
press the button again.
Stop playback (stop) .
Select a folder on an
MP3 disc
(select folder) + / .
Select a track or le (go back) / (go
forward) (or /
on the unit).
Find a point in a
track or le
Hold down (rewind) /
(fast forward) during playback,
and release the button at the
desired point.
Select Repeat Play REPEAT repeatedly until
“REP” or “REP1” appears.
To change the play mode
Press PLAY MODE repeatedly while the player is
stopped. You can select normal play (“ ” for all MP3
les in the folder on the disc), shue play (“SHUF”
or “ SHUF*” for folder shue), or program play
(“PGM”).
* When playing a CD-DA (audio) disc, (SHUF) Play performs the
same operation as normal (SHUF) Play.
5 Repeat steps 1 through 4 to store other stations.
You can preset up to 20 FM and 10 AM stations. e
preset stations are retained for about half a day even
if you disconnect the power cord or if a power failure
occurs.
6 To call up a preset radio station, press TUNING
MODE repeatedly until “PRESET appears, and
then press + / repeatedly to select the
desired preset number.

Getting StartedLocation of Controls

Main unit
Remote
is manual mainly explains operations using the
remote, but the same operations can also be performed
using the buttons on the unit having the same or similar
names.
To use the remote
Insert the two R6 (size AA) batteries (not supplied),
matching the polarities shown below.
Notes on using the remote
With normal use, the batteries should last for about six months.
Do not mix an old battery with a new one or mix dierent types of
batteries.
If you do not use the remote for a long period of time, remove the
batteries to avoid damage from battery leakage and corrosion.
Batteries installed devices shall not be exposed to excessive heat such
as sunshine, re or the like.
To lock the buttons on the unit (Child lock
function)
You can lock the buttons except  (on/standby) on
the unit to prevent them from being operated by mistake.
Hold down on the unit until “CHILD LOCK ON”
or “CHILD LOCK OFF” appears on the display. e
buttons except  on the unit will be locked or
unlocked.
Notes
e child lock will be cancelled when you disconnect the power
cord.
e disc can be removed from the CD compartment even when you
enable the child lock while a disc is in the compartment.
To set the clock
Use buttons on the remote to set the clock.
1 Press  to turn on the system.
2 Press TIMER MENU to select the clock set mode.
If “PLAY SET” ashes, press / repeatedly to
select “CLOCK,” and then press (enter) .
3 Press / repeatedly to set the hour, and then
press .
4 Use the same procedure to set the minutes.
Note
e clock settings are lost when you disconnect the power cord or if a
power failure occurs.
To display the clock when the system is o
Press DISPLAY . e clock is displayed for about
8 seconds.
To attach the speaker pads
Attach the supplied speaker pads to the bottom of the
front speakers to prevent slipping.
To use the iPod/iPhone
Insert a Dock Adapter into the Dock before use.
Dock Adapter
To remove the Dock
Adapter, pull it up with
your ngernail or a at
object using the slot inside
the adapter.
iPod/iPhone Connector
Note
e Dock Adapter is not supplied with the system. Use the adapter
supplied with your iPod when using an iPod model. When using an
iPhone models, purchase a compatible Dock Adapter from Apple Inc.
For details on the Dock Adapters, refer to the instructions supplied
with the Dock Adapters.
To adjust the volume
Press VOLUME +/ (or turn the VOLUME control on
the unit) .
To left speaker
To right speaker
AM loop antenna
FM lead antenna (Extend it horizontally.)
To wall outlet
CAUTION
On heat buildup
Heat buildup on the unit during operation is normal and is not cause for alarm.
Do not touch the cabinet if it has been used continuously at a high volume because the cabinet may have become hot.
Do not obstruct the ventilation holes.
Speakers
Connect the speaker cords to the SPEAKERS jacks.
Voltage selector
For models with a voltage selector, before connecting the
power cord to a wall outlet, set VOLTAGE SELECTOR to
the local power line voltage.
* Models with a voltage selector are
only available in some areas.
Power
Connect the power cord to a wall outlet.
If the plug does not t the wall outlet, detach the supplied
plug adaptor (only for models equipped with an adaptor).
Antennas
Find a location and an orientation that provide good
reception when you set up the antennas.
Keep the antennas away from the speaker cords and the
power cord to avoid picking up noise.
4-409-772-12(1)
© 2012 Sony Corporation Printed in China

Mini HI-FI

Component System

Operating Instructions
MHC-EC609iP GB