Recording a CD by specifying track order (continued)
8 Press (Pon the remote) to insert a pause at the end of side A.
“P” appears in the display and the total playing time resets to “0.00” in the display.
9 Repeat steps 5 and 6 for tracks from the same disc or steps 4 to 6 for tracks from another disc to programme the remaining tracks to be recorded on side B.
10 Press CD SYNC.
Deck B stands by for recording and the CD player stands by for playback. · (for front side) lights up.
11 Press DIRECTION repeatedly to select Ato record on one side. Select ß(or RELAY) to record on both sides.
12 Press REC PAUSE/START.
Recording starts.
To stop recording
Press on the deck B or on the CD player.
To check the order
Press CHECK on the remote repeatedly. After the last track, “CHECK END” appears.
To cancel Programme Edit
Press PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display.
Tip
When you want to reduce the hiss noise in
Selecting tape length automatically
— Tape Select Edit
You can check the most suitable tape length for recording a CD. Note that you cannot use Tape Select Edit for discs containing more than 20 tracks.
1 Insert a CD.
2 Press CD.
3 Press EDIT (EDIT/PTY on European model) once so that “EDIT” flashes.
The required tape length for the currently selected CD appears, followed by the total playing time for side A and side B respectively.
Notes
•You cannot use this function after programming. In order to use this function, you must first cancel the programme by pressing PLAY MODE repeatedly until “PROGRAM” or “SHUFFLE” disappears from the display.
•This function does not work when the total playing time of the CD is shorter than 1 minute.
•Dolby NR is off and DIRECTION (Aor RELAY) is ßwhen the mains AC power supply is switched off.
26