Others

Your camera does not work.

Use the type of batteries you can use with this camera (page 92).

The battery level is low (The E indicator appears). Install new batteries or charged Nickel- Metal Hydride batteries (t step 1 in “Read This First”).

The power is on, but the camera does not work.

The built-in microcomputer is not working properly. Remove the batteries, and then, after one minute, insert the batteries and turn on the camera.

Cannot identify an indicator on the screen.

See page 16.

The lens gets fogged.

Moisture condensation has occurred. Turn off the camera and leave it for about an hour before using it (page 94).

The camera becomes warm when you use it for a long time.

This is not a malfunction.

The lens does not move when you turn off the camera.

The batteries are discharged. Install new batteries or charged Nickel-Metal Hydride batteries (t step 1 in “Read This First”) or use the AC Adaptor (not supplied).

The Clock Set screen appears when you turn on the camera.

Set the date and time again (t step 2 in “Read This First”).

86