4
•PAINT menu
This menu contains items for making detailed image adjustments while using a waveform monitor to monitor the waveforms output by the camera. Usually, the support of a video engineer is required to use this menu. Although you can also use an external remote control panel or master setup unit to set the items on this menu, this menu is effective when using the camcorder by itself outdoors. This menu allows you to perform almost the same settings as those of the PAINT menu of the
•MAINTENANCE menu
This menu contains items for performing camera maintenance operations such as changing the system or infrequently used paint items. This menu allows you to perform almost the same settings as those of the MAINTENANCE menu of the
•FILE menu
This menu is used for performing file operations such as writing the reference file.
•DIAGNOSIS menu
This menu enables you to confirm the VTR status or a failed circuit board.
To return to the TOP menu
The following two methods are available:
•Point the arrow (→ ) to TOP on the right top on each page, then press the MIC/MENU knob.
•Push the MENU switch to the CANCEL side twice.