Sony MZ-E707 manual

3-234-033-13(1)

Portable MiniDisc Player

Operating instructions

“WALKMAN” is a trademark of Sony Corporation.

MZ-E707

Sony Corporation © 2001 Printed in Japan

WARNING

Getting started

Charge the supplied rechargeable battery before using it for the first time.

1Insert the rechargeable battery.

Insert the battery minus end first

	e
b	E	b

2Charge the rechargeable battery.

How to assemble the battery charging standInsert the prongs until they are firmly attached.

Playing an MD

1Insert an MD.

1 Slide OPEN to open the lid.	2 Insert an MD.	3 Close the lid.
	3
1		2

Insert an MD with the lable side facing up, pushing theMD to the direction of the arrow in the illustration.

2Play an MD.

2 VOL+

VOLUME +/–

GROUP

VOL–

BVarious ways of playbackRemote controlPLAYMODERPT/ENTDISPLAYSOUND

	X
HOLD
./N>	x
VOL +/–

Bottom side of the player3 Color Info-LED

HOLD

GROUP

Selecting the play mode

Repeat play

You can use this function to repeat playback in normal play, single play, shuffle play, or program play mode.

1 Press RPT/ENT on the remote control during playback.“” appears in the display.Repeat play indicationSearching for a specific track or a position quickly (Quick Search)You can do two kinds of quick searches.

•Index search — Searching quickly while monitoring the track number or track name (factory setting).

•Time search — Searching quickly while monitoring the elapsed time.1 During playback, press DISPLAY on the remote control for 2 seconds or more.

Listening to tracks in a specific group (Group Mode Playback)

Playback when group mode is off: Playback starts with the first track in the disc, and stops with the last track in the disc.

DiscTrack number

1 2 3 4 5 6 7 8

Playback when group mode is on: Playback of the selected group starts with the first track in the group, and stops with the last track in the group.

			Disc
Group 1			Group 2			Group 3
Track				Track			Track
number				number			number
1	2	3		1	2		1	2

On the remote control

1 Insert a disc which has group settings into the player, and then play the disc.

On the remote control

1 Insert a disc which has group settings into the player and play the disc.2 Hold down PLAYMODE until “– – –” in the display.The player enters group skip mode.

3 Within 5 seconds, turn the control repeatedly until the name or number of the desired group appears.

When there is a group name (Example: AAA)Group nameWhen there is no group nameGroup numberOn the player

1 Insert a disc which has group settings into the player and play the disc.

2 Press GROUP.

Note

Depending on the specifications of your MD recorder, the group function will not work.

Adjusting the sound quality (Digital Sound Preset)

You can emphasize the treble and bass to suit your taste. The player can store two sets of treble-bass adjustments, which can set be selected later during playback.

To select the sound qualityFactory settingsThe factory settings of each digital sound preset are as follows:•“SOUND1”: bass +1, treble ±0•“SOUND2”: bass +3, treble ±01 Press SOUND on the remote control repeatedly to select “SOUND1” or “SOUND2.”To adjust the sound quality

1 During playback, press SOUND on the remote control repeatedly to select “SOUND1” or “SOUND2.”

AB

Track number	The elapsed time
Track number	Track name

The number of total Group name tracks in the group

The number of	Disc name
total tracks
Track number	Track mode

z

The group name appears when you select the group on group skip mode. For more details, see “Selecting and playing specific groups” in “Using the group function.”

Notes

•Depending on whether group mode is on or off, the operating conditions, or the settings may not be selectable or the indications that appear may vary.

•The mode indication appears only during playback. It appears for 2 seconds, and is then replaced by the elapsed time of the current track.

Suppressing the skips of the sound (G-PROTECTION)The G-PROTECTION function was developed

To prevent fire or shock hazard, do not expose the unit to rain or moisture.

Do not install the appliance in a confined space, such as a bookcase or built-in cabinet.

To prevent fire, do not cover the ventilation of the apparatus with newspapers, table- cloths, curtains, etc. And don’t place lighted candles on the apparatus.

To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.

Certain countries may regulate disposal of the battery used to power this product. Please consult with your local authority.

to a wall outlet

b

to DC IN 3VAC power adaptor1Connect the supplied AC power adaptor to DC IN 3V.2 Place the player on the battery charging stand.

Make sure the CHARGE lamp turns on.

	1N>
	X
3 Color Info-LED1)	.
> N	x
x	.

1Turn the control towards N> on the remote control (or press > N on the player) to play the disc.

A short beep sounds in the headphones/earphones when using the remote control. The LED flashes and then lights up.

2 Pull and turn VOL +/– on the remote control (or press VOLUME +/– on the

You can select from various play modes using the PLAYMODE and RPT/ENT on the remote control.

1 Press PLAYMODE repeatedly to select one of the four play modes, as follows:

		Play mode indication
Display	Play mode
(none)	All the tracks are played

2 Turn the control on the remote control repeatedly until “SEARCH” flashes in the display, and press x on the remote control.

3 Turn the control on the remote control repeatedly until “Index” (index search) or “Time” (time search) flashes in the display, and press x on the remote control.

4 Press X on the remote control to pause.5 Turn and hold the control on the

2 Press DISPLAY for 2 seconds or more.

3 Turn the control repeatedly until “GROUP” flashes, and then press x on the remote control.

4 Turn the control repeatedly until “GROUP ON” flashes, and then pressxon the remote control.

“G” appears in the display and group mode is turned on. To turn off group mode, Select “GROUP OFF” and press x.

The LED lights up orange and the player enters group skip mode.3 Within 5 seconds, press . or>N repeatedly until the name or number of the desired group appears.

Note

If no operation is performed within 5 seconds in step 3, group skip mode is cancelled. To do the procedure, start from step 2 again.

Registering groups using your minidisc recorder

2 Press SOUND on the remote control for 2 seconds or more.

The player changes to the bass-setting mode. Pressing SOUND for 2 seconds or more again changes the player to the treble-setting mode.

When you select bass-setting mode, “B” appears. When you select treble-

to provide a higher level of shock resistance than that of existing players in order to allow the player to be used while jogging.

Note

The playback sound may skip if:

—the player receives stronger continuous shock.

—a dirty or scratched MiniDisc is played.

Changing playback speed (Speed Control)Speed control function is convenient for such

CautionThe use of optical instruments with this product will increase eye hazard.CAUTION — INVISIBLE LASER RADIATION WHEN OPENDO NOT STARE INTO BEAM OR VIEW DIRECTLY WITH OPTICAL INSTRUMENTSInformation

IN NO EVENT SHALL SELLER BE LIABLE FOR ANY DIRECT, INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY NATURE, OR LOSSES OR EXPENSES RESULTING FROM ANY DEFECTIVE PRODUCT OR THE USE OF ANY PRODUCT.

Full charging takes about 6 hours and then the CHARGE lamp will go off when charging is complete.

Do not operate the player when you place it on the battery charging stand or during charging. If you do so, it may cause the player to malfunction or prevent the battery from charging.

Using the dry battery
Attach the dry battery case to the		Insert the battery minus end first.
player.
		3	4
2	b
1

Insert a LR6 (size AA) alkaline dry battery.

To operate the player for the longest possible time, use the dry battery together with a fully rechargeable battery.

3Make connections and unlock the

HOLD control.

Connect firmly.To i jack

HOLD HOLD

How to use the control on the remote controlPlayback: Turn the control towards N> while the player is stopped.

FF: Turn and hold the control towards N> during playback. REW: Turn and hold the control towards . during playback. AMS: Turn the control towards . or N> during playback.

N>

Play/FF/AMS
		.
		REW/AMS
Adjusting the volume (VOL +/–)
	VOL+
+	+
–	–	VOL–
Pull	Turn	Push back

player) to adjust the volume.

The volume indicator appears in the display, allowing you to check the

volume level. After you adjust the volume, push back the control.

To stop play, press x.

Playback starts from the point you last stopped playing. To start playback from the beginning of the disc, turn and hold the control towards N> on the remote control (or hold down > N on the player) for 2 seconds or more.

1)The LED indicates the current operating status by the lighting up in the following colors. When the battery power is exhausted, the LED starts flashing. For more details, see “When to replace or recharge the battery.”

LED color	Operating status
Red	Normal play (The LED lights up continuously)
Green	Group mode* (The LED lights up continuously)
Orange	Group skip mode* (The LED lights for about 5 seconds)

*For more details, see “Using the group function.”

To	Do this (Beeps2) in the headphones)
Find the beginning of	Turn the control towards . on the remote control once
the current track or	(three short beeps). (Or press . on the player once.)
the previous track3)	Turn the control towards . on the remote control repeatedly
	(continuous three short beeps). (Or press . on the player
	repeatedly.)
Find the beginning	Turn the control towards N> on the remote control (two
of the next track4)	short beeps).
	Press > N on the player once.
Go backwards	Turn and hold the control towards .on the remote control.
while playing	Hold down . on the player.
Go forward	Turn and hold the control towards N>on the remote control.
while playing	Hold down > N on the player.
Pause	Press X on the remote control (continuous short beeps).
	Press X on the remote control again to resume play.
Remove the MD	Press x, and then slide OPEN.5)

2)You can turn off the beep sound. For more details, see “Turning off the beep sound.”

3)If you turn the control towards . on the remote control (or press . on the player) during the first track of the disc, the player goes to the beginning of the last track on the disc.

4)If you turn the control towards N> on the remote control (or press > N on the player) during the last track of the disc, the player goes to the beginning of the first track on the disc.

5)If you open the lid, the playback will begin from the beginning of the first track (except when disc information is stored to the personal disc memory or when group mode is on).

z

The MZ-E707 supports the newly developed DSP TYPE-R for ATRAC.

It thus allows you to enjoy TYPE-R high-quality sound from MDs recorded in SP stereo on TYPE-R- equipped MD decks, etc.

Note

When removing the disc, make sure to press x first, and then slide OPEN.

Viewing the display window of the remote controlTrack number Track name6) or elapsed time of the track

6)Appears only with MDs that have been electronically labeled.

z

•The player can play the track recorded by 2 ⋅ or 4 ⋅ long playing mode (LP2 or LP4). Normal stereo playback, LP2 stereo playback, LP4 stereo playback or monaural playback is automatically selected to match the audio source.

•The display on the remote control will turn off shortly after you press x.

(normal play)	once.
“1”	A single track is played
(single play)	once.
“SHUF”	All the tracks are played
(shuffle play)	in random order.
“PGM”	Tracks are played in the
(program play)	order that you specified.

Listening to tracks in a desired sequence (Program Play)

1 During playback, press PLAYMODE on the remote control repeatedly until “PGM” flashes in the display.

2 Turn the control on the remote control repeatedly to select a track number.

Track	Program number
number

3 Press RPT/ENT on the remote control. The track is entered.4 Repeat steps 2 and 3 to select other tracks in the desired sequence.

5 Press RPT/ENT for 2 seconds or more. The settings are entered and playback starts from the first programmed track.

z

•The program play settings will remain in memory even after playback finishes or is stopped.

•You can set the program play up to 20 tracks.

•The settings can be stored to the personal disc memory.

Notes

•All program settings are lost when the lid is opened.

•If no settings are made for 5 minutes while the player is stopped, the settings made up to that point are entered.

•If you turn on group mode during program play, the program play is canceled.

remote control until the desired track number/track name (index search) or the desired elapsed time (time search) appears in the display.

6 Press X on the remote control to cancel the pause.

z

•If you do this procedure while the player is in shuffle play mode, shuffle play starts from the track that you selected.

•If the player reaches to the first track or the last track on the disc as you are turning the control in step 5, it will return to the last track or the first track, respectively. (In group mode, if the player reaches to the first track or the last track in a group as you are turning the control in step 5, it will return to the last track or the first track in that group, respectively (see “Using the group function”).

Using the group functionThe MZ-E707 can be used with a disc which has group settings.

The group function is useful for playing a great number of tracks, or tracks that have been recorded in MDLP (LP2/LP4) mode.

What is a disc with group settings?

This is a disc with settings that organize tracks into groups, and which allow those groups to be selected.

The MZ-E707 does not support the recording of group settings. Use your MD recorder to record group information, and then use the MZ-E707 for playback.

			Disc
Group 1				Group 2			Group 3
Track					Track			Track
number					number			number
1	2	3	4		5	6		7	8

z

If your recorder has a function for editing disc names, you can use it to register groups. For details, see “Registering groups using your minidisc recorder.”

On the player

1 Insert a disc which has group settings into the player, and then play the disc.

2 Press GROUP for 2 seconds or more. The LED lights up green and group mode is turned on. To turn off group mode, press GROUP for 2 seconds or more again. The LED lights up red.

z

•When group mode is on, it is possible to do repeat play, shuffle play, or program play. For details on the respective operations, see “Selecting the play mode.”

•It is possible to save group mode’s on/off setting in the personal disc memory.

•In group mode, turning the controls on the remote control towards N> during playback of the last track of a group moves playback to the first track of the group. Turning the control 2 times on the remote control towards .while playing the first track of a group moves playback to the last track of the group.

Selecting and playing specific groups (Group Skip Function)

When playing a disc with group settings, the group skip function allows you to jump from the currently playing group to any other group on the MD. The group skip function can be used at any time during playback, regardless of whether the player is in group mode on or not.

When group mode is off:

Disc

Track number

1 2 3 5 6 7 8 4

	skip			skip		skip
When group mode is on:
			Disc
Group 1			Group 2		Group 3
Track			Track		Track
number			number		number
1	2	3	1	2	1	2
	skip			skip		skip

If your MD recorder (MD deck or recording MD Walkman) has a function for editing disc names, you can use it to register groups even if your recorder does not have the group function.

Make sure you enter the text string exactly as described below. The group function will not work if you enter the text string incorrectly.

To specify groups1 Change the disc name to the following by using your MD recorder:

0;[Disc name] // [First track of group 1 ]-

AB

[Last track of group 1] // [Name of group 1 ]-

BC

[First track of group 2] // [Last track of group 2 ]-

B B

[Name of group 2] // ......

C

ADisc name B Track number C Group name// Separator between group names; Separator between track number and Group name(Ex.) Set the following groups for the disc named “Collections ”:Group name for tracks 1-7:My Favorites“2001winter”Group name for tracks 8-17:Jun&Tac“sunshine head”Group name for tracks 18-24:THE NIGHT BUTTERFLYSGroup name for tracks 25-32:Dream World/Kiss Me!Text string entered :0;Collections//1-7; My Favorites“2001winter”//8-17;Jun&Tac“sunshine head”//18-24;THE NIGHT BUTTERFLYS//25-32;Dream World/Kiss Me!//

z

•Up to 99* groups can be registered on a single MD.

•The characters “;”, “/”, and “–” can be used in a group name.

•You can register the same group name more than twice on the same MD.

•You can specify a group without entering a group name (C) for it.

*The actual number depends on the editing ability of your recorder and may be less than 99 in some cases.

setting mode, “T” appears.

3 Turn the control on the remote control repeatedly to adjust the bass or the treble.

Example: While adjusting the bass,the cursor moves. (Position: –2)

–4 ±0 +3

The sound can be adjusted in eight steps, from –4 to +3.

To set the other digital sound preset, press SOUND to select “SOUND1” or “SOUND2,” and then do steps 2 and 3.

4 Press RPT/ENT on the remote control. The sound settings are stored and the playback display appears again.

To select a preset soundPress SOUND repeatedly to select “SOUND1,” “SOUND2.”Selecting no display turns off the digital sound preset function.

z

You can set a preset sound while playback is paused.

Notes

•Settings cannot be changed using the operation buttons on the player.

•When using a digital sound preset, the sound may break or become distorted if the volume is turned up too high, depending on the settings or the track.

BOther operationsViewing the track name and playing time

You can check the track or disc name, track number, the elapsed playing time of the current track, the number of the tracks recorded on the MD, the group name, and the total number of tracks in a group.

AB

1Press DISPLAY on the remote control. Each time you press DISPLAY, the display changes as the follows:

uses as language study.

The playing speed can be set at 80% to 110% normal speed, in seven steps of 5% each.

1 During playback, press DISPLAY on the remote control for 2 seconds or more.

2 Turn the control on the remote control repeatedly until “SPEED” flashes in the display, and then press x on the remote control.

The player changes to speed-setting mode.3 Turn the control to select the playback speed.Select the speed while listening the sound.

“+” shows the normal speed and the cursor shows the playback speed you are selecting.

Example: When the playback speed is 95% of the original speed, “–” and the cursor will flash alternately.

80% 100% 110%

The playing speed can be set at 80% to 110% normal speed, in seven steps of 5% each.

4 Press x on the remote control to set the playback speed.

During playback speeds other than normal, “S” appears to the right of the elapsed time.

z

Although all settings will be lost when you remove the disc from the player, the settings can be stored to the personal disc memory. For more details, see “Storing the settings for individual discs.”

Note

The playback sound will be affected by the playback speed.