Connection

In the Box
Internet TV (1) Keypad (1) Size AA batteries (2) IR Blaster cable (1) AC power cord (1) (except NSX-24GT1) Table-Top Stand (1) Cable cover (1) Screws (M4 x 10) (3) (for NSX-24GT1) Screws (M5 x 16) (3) (for NSX-32/40/46GT1) Quick Setup Guide (1) Reference Guide (1) Warranty card (1) End User License Agreement (1)
Inserting batteries
AA-size (R6)

Connect other devices

Connect the AV Receiver and other devices to the TV if necessary.
stepstepstep Connect the Cable/Satellite Box
Use one of the connection cables illustrated below. Then, place the IR Blaster near the
remote sensor of the Cable/Satellite Box.
When connecting the Cable/Satellite Box with an HDMI cable, you can use any HDMI jack on the TV.
For details of network connection with the Cable/Satellite Box,
see the operating instructions supplied with the Cable/Satellite Box.
You can control a Cable/Satellite Box via the Home Network depending on your Cable/Satellite TV provider.
For details, see “Help Guide” on the back side.
step
AV ReceiverOther Devices
Blu-ray Disc player/DVD player/Game etc.
Cable/Satellite BoxRouter
HDMI cable,
Component video/
audio cable or
Video/audio cable
IR Blaster
cable

Connect to the power source

Plug the TV into the wall outlet.
Refer to the Table-Top Stand leaflet (supplied) for directions on how to
attach the AC power cord (except NSX-24GT1) and the cable cover.
step Press the (on/standby) button
step Start Internet TV setup
Follow the directions of the Initial Setup Wizard displayed on the screen.
When you skip the Network Setup, only limited functions will be
available with the TV.
The screen may stay dark for several seconds after the Sony logo
disappears. Wait for a while until the Initial Setup Wizard is displayed.
It takes about 15 minutes to complete the Initial Setup.
* This illustration may differ from the actual display.

Connect to a network

When using wired connection, connect the TV and a router with
a LAN cable. When using wireless connection, you need to set
the Network Setup in the Initial Setup Wizard (on step 6).
Cable/Satellite Box
HDMI cable,
Component video/
audio cable or
Video/audio cable
IR Blaster
cable
Router
Internet TV Internet TV
Quick Setup GuideInternet TVNSX-24GT1/NSX-32GT1/NSX-40GT1/NSX-46GT1
Printed in U.S.A.
© 2010 Sony Corporation
4-197-994-13 (1)

Preparation

or Wireless LAN
Router
Internet TV
LAN cable
Place the IR Blaster so that the infrared
transmitter points to the remote sensor of
the Cable/Satellite Box. For details on the
IR Blaster, see “Help Guide” on the back
side.
PLEASE READ END USER LICENSE
AGREEMENT BEFORE USING
THIS PRODUCT
Not the actual ratio
IR Blaster cable
Optical digital
cable
Note If your connection method differs from that shown above, see “Help Guide” (http://esupport.sony.com/internettv/helpguide/). For details on “Help Guide,” see the back side.