Sony NSZ-GS7, NSZ-GX70 setup guide

NSZ-GS7 4-421-770-11(2)
In the Box
Network Media Player
Remote control
(Remote) (1)
To insert batteries into the
remote control
AC power cord (1)
HDMI cable (1)
(NSZ‑GX70 only)
Size AA batteries (2)
Quick Setup Guide (1)
Getting Started (1)
Reference Guide and
other documents
IR (infrared)
Blaster
cable (1)
What’s this?
The IR Blaster enables you to control
connected devices with your remote.
Please see “To control connected
devices using the remote” shown below
for more information.
Connection
step1Connect to your TV
Follow: A to connect to your TV directly.
: B to connect to your TV via AV Receiver
: C if your connection differs from the diagrams below.
A Direct to TV B To TV via AV Receiver C Other connection
TV
Set Top Box /
Digital Video Recorder
HDMI cable
(supplied with NSZ-GX70 only)
HDMI cable (not supplied)
(optional) (optional)
TV
Set Top Box /
Digital Video Recorder
HDMI cable
(supplied with NSZ-GX70 only)
HDMI cable (not supplied)
AV Receiver
See Help Guide for other connection patterns.
From your PC
http://www.sony.net/helpguide/r/networkplayer/
From your smartphone
step2
Wireless LAN
router*1*2
LAN cable (not supplied)
AC power cord  Connect to the power
source
 Change the TV input
Switch the input selector on the TV
so that the signal from the player
appears on your TV screen.
Then, a screen that shows how to
setup your remote appears.
Note
This will only appear the first time you setup your
player.
Broadband
router*2
*1 When using wireless connection, you need to set the Network Setup in the Initial Setup Wizard (on step 4).
*2 You can find MAC address in the Initial Setup Wizard (step 4) as needed. Select “Explain step” on “Connect to the Internet” screen.
Prepare for Network
connection
step3Connect to the power
source
step4
Follow the directions for the Initial Setup
displayed on screen.
– The screen may stay dark for several seconds after the
Sony logo appears, then the Initial Setup screen appears.
– When the Initial Setup screen (on which a picture of
a player and a hand holding a remote is displayed)
appears, press and hold (Enter) to pair your remote
with the player.
– Complete the Network setup process, otherwise the Initial
Setup Wizard cannot be closed.
– It takes about 15 minutes to complete the Initial Setup.
Start the Initial Setup
Wizard
To control connected devices using the remote
Quick Setup Guide
© 2012 Sony Corporation
Printed in China
4‑421‑770‑11(2)
This player is equipped with a built‑in IR Blaster that accepts remote commands and sends them to various connected devices to control them with your remote. This function works when the player is turned on.
When you set the player close to a connected device (as illustrated on the
right), you can control the device using the remote, including operations such as
adjusting the volume of the TV or an AV Receiver.
However, if you place the player in a location where IR signals cannot reach,
you cannot control connected devices with the built‑in IR Blaster. In this case,
connect the supplied IR Blaster as follows:
 Connect the IR Blaster cable to the player.
 Place the IR Blaster so that the infrared transmitter points to the IR receiver
(sensor) on the device you want to control, as illustrated on the right.
IR Blaster *
US
NSZ-GS7/NSZ-GX70
(NSZ-GX70 is only for the US)
Network Media Player Sony Customer Support
USA: http://esupport.sony.com/ | 1‑800‑222‑SONY
Canada: http://esupport.sony.com/CA/ | 1‑877‑899‑SONY
Please Do Not Return the Product to the Store
* Location of the IR receiver may vary depending on the product you are using.