Repeat mode (continued)

zTips

•You can fast-forward or fast-rewind by rotating the Shuttle switch, after the start point (A) is set. If the track reaches the end while fast-forwarding, the end point is set as point (B) and fast-forwarding continues. A-B Repeat starts when you release the Shuttle switch. If the track reaches the beginning while fast-rewinding, it jumps to the end of the track, the end point is set as point (B), and fast-rewinding continues.

•You can fast-forward or fast-rewind by rotating the Shuttle switch, during A-B Repeat playback. If the track reaches the track start/end while fast-forwarding or fast-rewinding, playback is stopped (enters Standby). A-B Repeat restarts when you release the Shuttle switch.

To clear the start point (A) and end point (B)

•Press the REPEAT/SOUND button during A-B Repeat playback.

•Press the MENU button during A-B Repeat playback.

•Select the Group mode by pressing the GROUP button during A-B Repeat playback.

•Select the previous or next track by rotating the Shuttle switch during A-B Repeat playback.

(The A-B Repeat mode is not cancelled.)

To cancel the A-B Repeat mode

Change the Repeat mode in the menu screen (page 14).

Playing specified sentences repeatedly (Sentence Repeat)

This function automatically detects only voice data from the setting point and repeats the voice data for setting counts. It is useful for learning a foreign language.

zTip

The default repeat counts setting is 2 times for one sentence. But you can change the repeat counts setting. Refer to “Setting the repeat counts” on page 17.

Nx button

Shuttle switch

Press (Confirm)

to (+/>)

d

 

e

o

M

puorG

to (./–)

e d

o

REPEAT/SOUND button

1 Select the Sentence Repeat mode (SENTENCE Rep) (page 14).

2 Press the Nx button to start playback.

3 Press the REPEAT/SOUND button to place the setting point during playback.

The Network Walkman detects spoken sections and non-spoken sections from the set point, and Sentence Repeat starts. (The spoken section is repeated once (during detection), and the setting is counted.)

0 1 0 0 : 1 2

Notes

•You cannot use Sentence Repeat in the Group mode, or when the current time is displayed.

•A spoken or non-spoken section of less than 1 second will not be detected.

•If a non-spoken section is not detected until the track end, the track end point is recognized as a non-spoken section and Sentence Repeat begins from the previous spoken section.

To clear the setting point

•Press the REPEAT/SOUND button during Sentence Repeat playback.

•Press the MENU button during Sentence Repeat playback.

•Select the Group mode by pressing the GROUP button during Sentence Repeat playback.

•Select the previous or next track by rotating the Shuttle switch during Sentence Repeat playback.

(The Sentence Repeat mode is not cancelled.)

To cancel the Sentence Repeat mode

Change the Repeat mode in the menu screen (page 14).

16