84GB

Connecting the PCM

recorder to your computer

To exchange tracks (files) between the
PCM recorder and your computer, connect
the PCM recorder to your computer.
1Connect the USB connector of the
PCM recorder with the USB port of your
running computer with the supplied
USB connecting cable inserted into the
connectors securely until each plug stops
to the end.
2Make sure the PCM recorder has been
recognized properly.
On the Windows screen; open “My
Computer” and make sure that “PCM
RECORDER” has been recognized.
On the Macintosh screen; make sure that
an “PCM RECORDER” drive is
displayed on the desktop.
While the PCM recorder is connected to the
computer, “Connecting” is displayed in the
display window of the PCM recorder.
PNotes
If you connect more than two USB devices
to your computer, normal operation will not
be guaranteed.
Use of this PCM recorder with a USB hub or
a USB extension cable other than the
supplied cable is not guaranteed.
A malfunction may occur depending on the
USB devices connected at the same time.
Before connecting the PCM recorder to the
computer, make sure that the batteries are
inserted in the PCM recorder.
It is recommended that you disconnect the
PCM recorder from the computer when you
are not using the PCM recorder connected to
the computer.
To USB port
PCM recorder
Computer
USB connecting
cable (supplied)