Inserting the Wireless LAN PC Card
Notes
•If your computer has two PC card slots, insert the Wireless LAN PC Card into the top slot. Inserting it into the bottom slot blocks the top slot with its antenna.
•If your computer is the
Memory Stick slot while the Wireless LAN PC Card is inserted.
•Before using the Wireless LAN PC Card, turn off System Suspend mode or System Hibernation mode using the PowerPanel software. While the computer is in System Suspend mode or System Hibernation mode, the Wireless LAN PC Card may not be recognized when it is removed and reinserted.
If you are inserting the Wireless LAN PC Card for the first time, install the driver software before inserting the Wireless LAN PC Card. See Installing the driver software on page 13 for details.
This section explains how to insert and remove the Wireless LAN PC Card to your computer.
You do not need to turn off your computer when inserting the Wireless LAN PC Card.
1 Remove the PC card slot protector from the computer.
(Some computers contain the card slot protector to prevent damage to the slot while not in use.)
2 Insert the Wireless LAN PC Card into the PC card slot.
Push the Wireless LAN PC Card into the slot until it is firmly seated. Inserting the card will extend the eject button.
If the card does not fit easily, do not force it in. Take the card out and try reinserting.
Insert the card in the direction of the arrow.
To the PC card slot.
To remove the Wireless LAN PC Card
1 Close the software that uses the wireless LAN.
2 Stop PC Card Services on the system tray and/pr Control Panel.
3 Remove the Wireless LAN PC Card, following the instructions in your computer's manual.
12