Sony PCWA-C100 manual 19

3 Click the Configuration tab to verify the settings.

Confirm that the following are displayed under “The following network components are installed.”

–NetBEUI -> Sony PCWA-C100 Wireless PC Card.

–TCP/IP -> Sony PCWA-C100 Wireless PC Card.

–Client for Microsoft Networks.

–File and printer sharing for Microsoft Networks.

Also confirm that Client for Microsoft Networks is displayed under the Primary Network Logon pull- down menu.

If everything is displayed, proceed to To specify the IP address on page 23.

If any of these components are missing, you must add each component individually.

For further instructions see below.

To add TCP/IP on this page.

To add NetBEUI on page 21.

To add Client for Microsoft Networks on page 21.

To add File and printer sharing for Microsoft Networks on page 22.

When you have added all components, proceed to To specify the IP address on page 23.

To add TCP/IP

If TCP/IP -> Sony PCWA-C100 Wireless PC Card is not displayed in step 3 above follow the steps below.

1 Click Add on the Configuration tab.

The Select Network Component Type dialog box appears.

19