Sony BKM-B10, PFM-42B1E, RM-42B, PFM-42B1

1-9

PFM-42B1, PFM-42B1E

(GB)

Using On-screen Menus

qk W-VGA

Select ON to input the W-VGA (852×480) signal.

When you set this item to ON, the VGA input signal

is determined to be 852 × 480. Otherwise, the VGA

input signal is determined to be 640 × 480.

ql CLOSED CAPTION

Displays closed captions.

For details, see “Displaying closed captions” on page 19

(GB).

w; COLOR SYSTEM

Selects the input signal.

AUTO: to display NTSC, PAL or SECAM signals

443NT: to display NTSC4.43 signals

PAL60: to display PAL60 signals

PAL-M: to display PAL-M signals

wa SCREEN FILL

Selects the point of origin for resizing the picture.

CENTER: Sets the point of origin at the center of

the monitor.

CORNER: Sets the point of origin at the upper-left

corner of the monitor.

ws POWER CONTROL

Sets the length of time until the system goes into the

power saving mode.

For details, see “Controlling Power On/Off Automatically

(Power Control Function)” on page 33 (GB).

wd SCREEN SAVER

Enables a screen saver to reduce afterimage or

ghosting.

For details, see “Reducing Afterimage/Ghosting (Screen

Saver Function)” on page 31 (GB).

wf TIME SET

Sets the time.

For details, see “Adjusting the time” on page 19 (GB).

wg LANGUAGE

Selects the on-screen language (English, German,

French, Italian, Spanish or Japanese).

For details, see “Selecting the On-screen Language” on

page 30 (GB).

MEMORY menu

This menu is used for saving or recalling the settings

in the PIC CONTROL and PIC SIZE menus.

ENTER

MEMORY

LOAD

SAVE

SELECT SET END

For details, see “Using the Memory Function” on page 28

(GB).

wh LOAD

Recalls the preset settings.

wj SAVE

Saves the settings.

REMOTE menu

This menu is used for remote control settings.

ENTER

REMOTE

INDEXNo. : 001

REMOTE MODE : TV

REMOTE ONLY : OFF

SELECT SET END

wk INDEX No.

Sets the index number of the monitor.

Note

When you set the number, use the buttons on the

monitor.

For details about the index number, see “Operating a

Specific Monitor With the Remote Commander” on page 35

(GB).

wl REMOTE MODE

Selects the Remote Commander mode.

TV: The Sony monitor’s or the TV’s commander

PJ: The Sony projector’s commander

OFF: Disables the remote control.

(GB)

Using On-screen Menus

Note

When you change the Remote Commander mode, use

the buttons on the monitor. You cannot change the

Remote Commander mode with the Remote

Commander.

For details, see “Using Other Remote Commander

Models” on page 37 (GB).

e; REMOTE ONLY

Select ON to disable the control buttons on the

monitor. The monitor can only be controlled with the

Remote Commander.

To cancel the REMOTE ONLY mode, set REMOTE

ONLY to OFF with the Remote Commander, or press

the MENU button while pressing the 1 (standby)

switch on the monitor. The monitor turns to the

standby mode and the REMOTE ONLY mode is

cancelled.

The setting in this item is still retained when the AC

power cord is disconnected or when you turn on/off

the monitor with the Remote Commander.

STATUS menu

This menu is used for displaying the internal status of

the monitor.

STATUS

MODEL NAME : P F M - 42B1E

SERIAL No. : 2000001

OPERATION : 000 0 01 H

SOFTWARE :

Ver

1.00

TEMPERATURE : OK

FAN : OK

ea MODEL NAME

Indicates the model name.

es SERIAL No.

Indicates the serial number.

ed OPERATION

Indicates the total number of hours of operation.

Note

The standby mode is not counted as part of the

OPERATION time.

ef SOFTWARE

Indicates the system software version.

eg TEMPERATURE

Indicates whether the internal temperature of the

monitor is normal.

OK: Normal

NG: Unusual

When the internal temperature is unusual, NG is

displayed and the item flashes in red. The STANDBY

indicator on the 1 (standby) switch / indicator section

also flashes.

Note

The “TEMPERATURE NG” message may appear

when the ventilation holes are blocked or the monitor

is installed in a poorly ventilated location. In this case,

check that the ventilation holes are not blocked and

install the monitor in a well ventilated location. If the

message is still displayed, contact your authorized

Sony dealer.

When the STANDBY indicator flashes or NG is indicated,

see “Self-diagnosis Function” on page 35 (GB).

eh FAN

Cooling fans are built into this monitor. This item

indicates whether the cooling fans work properly.

OK: Normal

NG: Unusual

When the cooling fans are not working normally, NG

is displayed and the item flashes in red. The

STANDBY indicator on the 1 (standby) switch /

indicator section also flashes.

Notes

•When the “FAN NG” message appears, contact your

authorized Sony dealer.

When the STANDBY indicator flashes or NG is indicated,

see “Self-diagnosis Function” on page 35 (GB).

•The cooling fans detect the monitor’s internal

temperature and control the fan rotation. If the

ambient temperature is high, the fan speed increases

and the fan noise will be louder.