Timer-recording radio programs (continued)

Tip

If you made a mistake, press CANCEL. Each time you press the button, the last setting is clered. Re-enter the settings.

Note

To change the recording side of the tape from the reverse side (9) to the front side ((), press TIMER SET/OFF to make the

tindication disappear, and press TIMER SET/ OFF again.

Tips

•The preset settings remain until you reset them.

•When you select both sides recording, the recording will stop after the both sides recording finishes so that accidental recording will not be made.

•The display window dims while the waking up timer is on.

5 Set the timer to the hour and the minutes you want to start recording.

1Press HOUR+/– to set the

RADIO

hour.

REC

 

2Press MIN+/– to set the

ON

minite.

 

3Press ENTER.

6 Set the timer to the hour and the minutes you want to stop recording. (Do as step 5.)

7 Press SELECT +/– to set the volume you want, and press ENTER.

8 Press TIMER SET/OFF.

The power goes off. The tindication and the recording side of the tape (front side (()) appear in the display.

At the preset time, the power will go on and the recording will start. Then the power will go off at the preset time, and the player will enter into the standby mode.

To check/change when the recording will start

Press TIMER, then ENTER. Each time you press ENTER, a stored setting lights up. Change the setting if you need to when the setting lights up. When you finish checking, press TIMER.

To listen to the radio, etc. before a timer-recording starts

If you turn on the player, you can use it as usual. Before the preset time, tune in the station you want to record and turn off the power.

To stop timer-recording

Turn off the power.

28EN The Timer