Sending and receiving images
You can transfer images with another PSP™ system using ad hoc mode (
page 108). The steps for the sender and the receiver are different.
Sender | Receiver |
1 Set up for ad hoc mode. (both sender and receiver)
1Turn on the WLAN switch on the left side of the PSP™ system (
page 23).
2 Prepare to receive the image. (receiver)
1Under 
, select the icon for the location where you want to save the image, and then press the 
button.
2Select "Receive", and then press the 
button.
The system is now ready to receive an image.
3 Send the image. (sender)
1Under 
, select the image that you want to send, and then press the
button.
2Select "Send", and then press the 
button.
The nicknames for PSP™ systems ready to receive an image are displayed.
3Select the system to send to, and then press the 
button.
The system starts to send the image.
4 Save the image received. (receiver)
When the transfer is completed, the image that was received is displayed on the screen.
1With the image displayed, press the 
button.
A confirmation message is displayed.
2Select "Yes", and then press the 
button.
Hints
•The location where an image is saved depends on your selection in step
•You can also transfer images using the 
page 73).
US
Photo
Photo options menu | 79 |