8 Check the settings.
This screen displays the setting details. Press the left button to return to the previous screens to correct any of the settings, if necessary.
When you have finished selecting your settings, press the right button to go to the next screen.
9 Save the connection.
Press the 
button to save the connection on your system.
10 Test the connection.
Before testing the connection, check that the PSP® system's WLAN switch is turned on.
Select "Test Connection", and then press the 
button. The system will connect to the selected access point.
11 Confirm the connection test results.
If the connection is successful, information about the network connection is displayed. Press the 
button to end the connection test.
Hints
•The system will also perform an Internet connection test after connecting to an access point. The results of the Internet connection test will be shown in the connection results screen.
•If the connection test fails, follow the
(
page 255). For additional information, refer to the instructions supplied with the network device and by your Internet service provider.
•If the IP address and DNS information will be obtained by a DHCP server, select "Custom" in step 7. Each option will be set to "Automatic".
254Network Settings