Locating a Particular

Point in a Track

You can also use the mand M buttons to locate a particular point in a track during playback or playback pause.

When using the remote, set SELECT to CD for operations on DECK A, or to CDR for operations on DECK B.

AMS ./>

m/M

To locate a

Press and hold

point

 

 

 

While

During playback, press AMS

monitoring the

.(backward) >(forward) (or

sound

press mor Mon the remote

 

repeatedly) and hold until you find

 

the point.

 

 

Notes

If the disc reaches the end while you are pressing AMS >or Mon the remote during sound monitoring, the recorder stops.

Tracks that are only a few seconds long may be too short to scan using the search function. For such tracks, it is better to play the disc at normal speed.

Playing Tracks

Repeatedly (Repeat Play)

You can play tracks repeatedly in any play mode.

Before using the remote, set SELECT to CD for operations on DECK A, or to CDR for operations on DECK B.

REPEAT

1 Each time you press REPEAT on the remote, the REPEAT indicator in the front panel display lights and toggles as “REPEAT,” “REPEAT 1,” and then lights off.

The deck repeats the tracks as follows:

When the disc The deck repeats is played in

Normal play

All the tracks by “REPEAT”.

(page 7)

One track repeat by “REPEAT 1”

 

 

Shuffle play

All the tracks in random order by

(page 12)

“REPEAT”

 

 

Program Play

All the same Program by

(page 12)

“REPEAT”

2 Press H.

To stop Repeat Play

Press x.

To cancel Repeat Play

Press REPEAT until the indicator disappears.

Note

You cannot use Repeat Play, when Relay Play is ON (page 13).

Operations Basic

11