bNotes

•Angles and subtitles cannot be changed with titles recorded on this recorder.

•96 kHz PCM audio and DTS audio do not have surround effects.

•The surround effects do not work while performing playback quickly with sound.

Notes on playing DTS sound tracks on a CD

•When playing DTS-encoded CDs, excessive noise will be heard from the analogue stereo jacks. To avoid possible damage to the audio system, the consumer should take proper precautions when the analogue stereo jacks of the recorder are connected to an amplification system. To enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be connected to the digital jack of the recorder.

•Set the sound to “Stereo” using the (audio) button when you play DTS sound tracks on a CD (page 58).

Notes on playing DVDs with a DTS sound track

DTS audio signals are output only through the DIGITAL OUT (COAXIAL or OPTICAL) jack.

When you play a DVD with DTS sound tracks, set “DTS” to “On” in “Audio” setup (page 82).

Adjusting the picture quality

+RW -RWVR-RWVideo +R

-R DVD

VCD

1 Press TOOLS during playback to select “Video Settings,” and press ENTER.

Video Settings

Select the item you want to change.

Y NR :

2

C NR :

2

BNR :2

MNR :1

DVE :Off

PB Video Equalizer

2 Select an item, and press ENTER.

The adjustment display appears.

“Y NR” (luminance noise reduction): Reduces noise contained in the luminance element of the video signal.

“C NR” (chroma noise reduction): Reduces noise contained in the colour element of the video signal.

“BNR” (block noise reduction): Reduces “block noise” or mosaic like patterns in the picture.

“MNR” (mosquito noise reduction): Reduces the faint noise appearing around the outlines of the images. The noise reduction effects are automatically adjusted within each setting range according to the video bit rate and other factors.

“DVE” (digital video enhancer): Sharpens the outlines of the images.

“PB Video Equalizer” (Playback video equalizer): Adjusts the picture in greater detail.

Select an item and press ENTER.

•Contrast: changes the contrast.

•Brightness: changes the overall brightness.

•Colour: makes the colours deeper or lighter.

•Hue: changes the colour balance.

Playback

,continued 59