Sony RDR-GXD310 Display, Remote control, Recording from the equipment with a timer, The clock has stopped, The remote does not function, Synchro-Recordingdoes not complete

,Other timer setting overlapped the timer setting (page 53).

,There is no DVD inside the recorder.

,There is not enough disc space for the recording.

,A scrambled channel is selected.

,The Channel activated Parental Lock is selected.

Synchro-Recording does not complete.

,The timer setting for the connected equipment overlapped the recorder’s timer setting (page 55).

,There was a power failure during the recording.

Recording does not stop immediately after you press x REC STOP.

,It will take a few seconds for the recorder to input disc data before recording can stop.

Recording does not stop after you press x.

,Open the remote’s cover and press x REC STOP.

Timer recording is not complete or did not start from the beginning.

,There was a power failure during recording. If the power recovers when there is a timer recording, the recorder resumes recording. Should the power failure continue for more than 1 hour, reset the clock (page 74).

,Other timer setting overlapped the timer setting (page 53).

,Disc space was not enough.

Contents previously recorded were erased.

,Data that has been recorded on a DVD with a PC will be erased from the disc when the disc is inserted.

Recording from the equipment with a timerNothing was recorded even though you set the Synchro-Rec setting correctly.

,You forgot to turn off the connected equipment. Turn off the connected equipment and set the recorder to Synchro-Rec standby mode

(page 54).

,The recorder was not set to the Synchro- Recording standby mode. Press SYNCHRO REC to have the recorder stand by for recording. Make sure the SYNCHRO REC indicator lights up on the front panel (page 54).

,The recorder is connected to the TV output jack of the connected equipment.

The recorder automatically starts recording when the satellite receiver is turned on.

,The Synchro-Rec function was activated. Turn off the satellite receiver and cancel the Synchro- Rec function (page 54).

DisplayThe clock has stopped.

,Set the clock again (page 74).

,The clock stopped due to a power failure that lasted for more than 1 hour. Reset the clock (page 74).

The TIMER REC indicator is flashing.

, The disc does not have enough space.	Additional
, Insert a recordable disc inside the recorder.

The recording mode indication is incorrect.	Information
, When the recording is less than three minutes,
the recording mode indication may be displayed
incorrectly. The actual recording itself is
correctly made in the selected recording mode.
, After playing titles recorded in SLP and SEP
mode, the recording mode indication may
change depending on the recorded programme.

The clock does not appear in the front panel display.

,“Dimmer” in “Options” setup is set to “Power Save” (page 85).

,The “Power Save” in “Options” setup was set to “On,” and the recorder is in standby (page 86).

Remote controlThe remote does not function.

,Batteries are weak.

,The remote is too far from the recorder.

,The remote’s manufacturer code returned to the default setting when you replaced the batteries. Reset the code (page 19).

,Turn on the recorder.

,continued 91