83
Additional Information
The picture does not fill the screen.
,Set “TV Type” in the “Video In/Out” setup
in accordance with the screen size of your
TV (page 75).
The picture does not fill the screen, even
though the picture size is set in “TV
Type” in the “Video In/Out” setup.
,The picture size of the title is fixed.
The picture is black and white.
,If you are using a EURO AV (SCART)
cable, check that “LINE 3 Out [LINE 1
In]” in the “Video In/Out” setup is set to
the appropriate item that conforms to your
system (page 75).
,If you are using a EURO AV (SCART)
cable, be sure to use one that is fully wired
(21 pins).
There is no sound.
,Re-connect all connections securely.
,The connecting cable is damaged.
,The input source setting on the audio
component or the connection to the audio
component is incorrect.
,Set the selector on the EURO AV adapter
to the “OUTPUT” position (page 17).
,The recorder is in reverse play, fast-
forward, slow motion, or pause mode.
,If the audio signal does not come through
the DIGITAL OUT (COAXIAL)/HDMI
OUT jacks, check the “Audio Out” setup
(page 78).
,The recorder supports only MP3 audio,
Dolby Digital and MPEG audio for DivX
video files. Press AUDIO to select a
supported audio signal format.
,When using the HDMI connection, no
signal is output from the other audio output
jacks except for the DIGITAL OUT
(COAXIAL) jack.
No sound is output from the HDMI OUT
jack.
,Try the following: 1Turn the recorder off
and on again. 2Turn the connected
equipment off and on again. 3Disconnect
and then connect the HDMI cable again.
,The HDMI OUT jack is connected to a
DVI device (DVI jacks do not accept audio
signals).
,The equipment connected to the HDMI
OUT jack does not conform to the audio
signal format. In this case, set “HDMI
Audio” to “PCM” in the “Audio Out”
setup (page 79).
Sound is noisy.
,Audio signals from the LINE 1 jack are
output in standby mode when connecting
your TV to the LINE 3 – TV jack. This is
not a malfunction.
In this case, reconnect your TV to the
LINE 2 OUT jacks, or turn off the
equipment connected to the LINE 1 jack.
The sound volume is low.
,The sound volume is low on some DVDs.
The sound volume may improve if you set
“DRC” in the “Audio Out” setup to “On”
(page 79).
An alternate audio track cannot be
recorded or played.
,When recording from connected
equipment, set “External Audio” to
“Bilingual” in the “Audio In” setup
(page 77).
,When recording or playing multilingual
tracks (main or sub), set the appropriate
settings in the “Audio In” setup (page 77).
,If you have connected an audio component
to the DIGITAL OUT (COAXIAL) jack
and want to change the audio track for the
HDD (when “Bilingual Rec. Mode
(HDD)” is set to “On” in the “Audio In”
setup (page 77)) during playback, set
“Dolby Digital” in the “Audio Out” setup
to “PCM” (page 78).
The sound is breaking up.
,The signal strength is low. For digital
broadcasting, you can check the signal
strength using the blue button (“Signal”) in
“Digital Channel List” in the “Channel”
setup (page 69).
,Check aerial installation.
Sound
,continued