Creating your own programme (Programme)

HDD -RWVideo *1 -RVideo*1 VCD CD

DATADVD *2 DATA CD *2

*1 finalised disc only

*2 MP3 audio tracks only

You can play the contents of the HDD or a disc in the order you want by arranging the order of the titles/chapters/albums/tracks on the HDD or disc to create your own programme. You can make a programme of up to 24 chapters/tracks, etc.

1 Press PLAY MODE during playback.

For audio tracks on a DATA DVD/ DATA CD/CD, press , while the Title List is displayed, and select “Play Mode.”

The “Play Mode” menu appears.

2 Select “Programme,” and press

ENTER.

3 Select “Input/Edit Programme,” and press ENTER.

The “Input/Edit Programme” display differs depending upon the disc type. Example: DVD

4 Select a title or album (example: Title 01) using M/m, and press ,.

5 Select a chapter or track (example: Chapter 001) using M/m, and press

ENTER.

The chapter or track is programmed. If you make a mistake, select the step number (example: 01.) using </M/m, and press CLEAR.

6 To programme other chapters or tracks, press </M/m/, to select a step number, and repeat steps 4 and 5.

7 Press H.

Programme play starts.

To stop Programme play

Press x (stop).

To cancel Programme play

Press CLEAR during playback. Or, set “Programme” to “Cancel Programme Play” in the “Play Mode” menu.

To erase the programme

Press CLEAR in stop mode. Or, set “Programme” to “Erase Programme List” in the “Play Mode” menu.

zHints

The programme you made remains after Programme play finishes. To play the same programme again, set “Programme” to “Start Programme Play” in the “Play Mode” menu. However, the programme is cleared after you remove the disc or press [/1.

You can repeat Programme play. During Programme play, set “Repeat” to “Repeat Programme” in the “Play Mode” menu (page 53).

54