To edit titles on the Dubbing List

1Follow steps 1 to 7 of “Dubbing Using Dubbing List” on page 66.

The “Title Edit” display appears.

2Select a title you want to edit, and press

ENTER.

The sub-menu appears.

3Select an option, and press ENTER. The options differ depending on the dubbing direction or disc type.

“Erase”: Erases the selected title.

“Title Name”: Names or renames a title (page 37).

“A-B Erase”: Erases the section of the title (page 60).

“Move”: Changes the order of titles (page 63).

“Preview”: Allows you to check the content of a title.

“Divide”: Divides a title into two titles (page 60).

“Combine”: Combines two titles (page 63).

“Chapter Edit”: Edits chapters (page 61).

“Set Thumbnail”: Changes the title’s thumbnail frame that appears in the Title List (page 35).

“Recording Mode”: Sets the picture quality of the dubbing.

“Bilingual”: Sets how a bilingual audio programme is dubbed.

“Cancel”: Exits the sub-menu.

4Repeat steps 2 and 3 to edit all of the titles.

5Go to step 8 of “Dubbing Using Dubbing List” on page 66 to dub edited titles.

bNotes

The Dubbing List you created remains after dubbing. To edit the existing Dubbing List, select “Use Previous Dubbing List” in step 4. The Dubbing List is cleared when:

you change “Input Line System” setting in the “Basic” setup (page 101).

you reset the recorder (page 124).

you open the disc tray (except when dubbing from the HDD).

you edit the titles on a disc (except when dubbing from the HDD).

you switch the Title List to Original or Playlist (when dubbing from DVD-RWs/DVD-Rs in VR mode only).

you finalise the disc.

The “seams” that are left over from editing may remain on the disc after dubbing to DVD+RWs/ DVD-RWs (Video mode)/DVD+Rs/DVD-Rs (Video mode).

Finalisation is cancelled if a timer recording starts, even if you set “Finalise” to “Yes” in step 9.

68