D.TV Auto Channel Setting

If the aerial cable is connected to the DIGITAL AERIAL IN jack (hookup A), select “Auto Scan.” Then, select your country/region using </,, and press ENTER. The recorder will automatically capture and store the available TV and Radio channels.

If the aerial cable is connected to the ANALOG AERIAL IN jack (hookup B or C), select “Do not set.”

For details, see page 15.

A.TV Auto Channel Setting

If the aerial cable is connected to the ANALOG AERIAL IN jack (hookup B or C) and the TV is connected to this recorder not using SMARTLINK, select “Auto Scan.” Then, select your country/ region using </,, and press ENTER. The programme position order will be set according to the country/region you set.

If the aerial cable is connected to the ANALOG AERIAL IN jack (hookup B or C) and the TV is connected to this recorder with SMARTLINK, select “Download from TV” (For details, refer to the operating instructions supplied with your TV). Then, select your country/region using </,, and press ENTER. The tuner preset data will be downloaded from your TV to this recorder.

For details, see page 15.

If the aerial cable is connected to the DIGITAL AERIAL IN jack (hookup A) only, or to skip this setting, select “Do not set.” Then, select your country/region using </,, and press ENTER.

To set the programme positions manually, see page 131.

Clock Setting

The recorder will automatically set the clock when any digital channels have been scanned and stored. Go to the “EPG Type Select” setting.

Select “Auto” when a programme position in your local area broadcasts a time signal. The “Auto Clock Setting” display appears.

1Select the programme position of the station that carries a time signal using </,.

2Select “Start” using m, and press

ENTER.

If a clock signal cannot be found, press O RETURN, and set the clock manually.

Select “Manual” to set the clock manually. The “Manual Clock Setting” display appears.

1Select the time zone for your area using </,, and press m.

2Select “On” if you are now on summer time, and press ENTER.

3Set the day, month, year, hour, and minutes using </M/m/,, and press ENTER to start the clock.

EPG Type Select

Select the EPG (Electronic Programme Guide) type to use.

If no programme positions for digital broadcasts are found after scanning, the “EPG Type Select” display does not appear. The EPG type is automatically set to the country/area you select when setting the program positions.

Settings and Hookups

,continued 27