Sony RDR-HXD710, RDR-HXD910 Disc and Remote Control Settings/Factory Settings (Options), Parental Control (Password), Dimmer, Format DVD-RW (DVD-RWonly), 2 Select “SETUP,” and press ENTER

Parental Control (Password)

This “Password” Setup allow you to set or to modify the password that gives access to Parental Control settings.

1 Press SYSTEM MENU while the recorder is in stop mode.

2 Select “SETUP,” and press ENTER.

3 Select “Password,” and press ENTER.

The Password Setup Display appears

•If you have not yet set a password, the display for registering a new password appears.

Password

Enter a new password.

OK

Cancel

•When you have already registered a password, the display for entering the password appears.

Password

Enter your password.

OK

Cancel

If you wish to change your password, first enter your current password using the number buttons, then select “OK” and press ENTER. The display for registering a new password appears.

4 Enter your new four-digit password using the number buttons, then select “OK” and press ENTER.

bNote

If you forget your password, you will have to reset it by selecting “Parental Control” of “Factory Setup” in “Options” setup (page 102).

Disc and Remote Control Settings/Factory Settings (Options)

The “Options” setup allows you to set up other operational settings.

1 Press SYSTEM MENU while the recorder is in stop mode.

2 Select “SETUP,” and press ENTER.

3 Select “Options,” and press ENTER.

The “Options” setup appears with the following options. The default settings are underlined.

SETUP

Settings	Format DVD-RW :	VR
DTV Settings	Dimmer :	Normal
Video	Power Save :	Off
Audio	Auto Display :	On
Features	Command Mode :	DVD3
Password	Factory Setup

Options
Easy Setup		and Settings
Format DVD-RW (DVD-RW only)
The recorder automatically starts formatting in		Adjustments
VR mode or Video mode, whichever is selected
below, when a new, unformatted DVD-RW is
inserted.
VR	Automatically formats the disc in
	VR mode.
Video	Automatically formats the disc in
	Video mode.

Dimmer

Adjusts the lighting of the front panel display.

Normal	Bright lighting.
Power	Low lighting. Turns off the
Save	lighting when the power is off.

bNote

When “Power Save” in “Options” setup is set to “On,” the front panel display is turned off during standby regardless of this setting.

,continued 101